![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
8070 small pto |
Post Reply ![]() |
Author | |
zbum ![]() Bronze Level ![]() Joined: 01 Oct 2023 Location: 74075 Points: 6 |
![]() ![]() ![]() ![]() ![]() Posted: 07 Oct 2023 at 12:02pm |
I recently bought a ‘82 8070. Equipment has small 1000 pto. Can the large pto be swapped out for a small pto? Or do you have to do the 540/1000 conversion to make this work? Have researched and not sure if I just am missing it? The previous owner used a pto adapter and the splines are pretty worn out, so would like to change out pto shaft.
|
|
![]() |
|
Sponsored Links | |
![]() |
|
SilverShoes ![]() Bronze Level ![]() Joined: 20 Feb 2014 Location: Seneca, Kansas Points: 104 |
![]() ![]() ![]() ![]() ![]() |
Does it just have the small 1000 or can you unbolt the shaft and flip it. Never seen an 8070 with just a small thousand. My 8070 has just a large thousand
Edited by SilverShoes - 07 Oct 2023 at 12:24pm |
|
![]() |
|
zbum ![]() Bronze Level ![]() Joined: 01 Oct 2023 Location: 74075 Points: 6 |
![]() ![]() ![]() ![]() ![]() |
Sorry, I think I was confusing in my post. My implements are small 1000 and 8070 has the large. Can the large be swapped out with a small in the tractor. It doesn’t have bolts to flip it. We used to have an 8050 and doesn't have the same pto shaft that you could flip.
|
|
![]() |
|
SteveM C/IL ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8073 |
![]() ![]() ![]() ![]() ![]() |
You have to put the 540-1000 system in
|
|
![]() |
|
zbum ![]() Bronze Level ![]() Joined: 01 Oct 2023 Location: 74075 Points: 6 |
![]() ![]() ![]() ![]() ![]() |
Ok, thank you for the replies
|
|
![]() |
|
AC720Man ![]() Orange Level ![]() ![]() Joined: 10 Oct 2016 Location: Shenandoah, Va Points: 4750 |
![]() ![]() ![]() ![]() ![]() |
Just a thought, can your Equipment’s yokes be changed out to match the tractor?
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 19714 |
![]() ![]() ![]() ![]() ![]() |
You don't have to go to 540/1000. You can get a straight small 1000 from an old 7050 or maybe early 7060.
|
|
![]() |
|
zbum ![]() Bronze Level ![]() Joined: 01 Oct 2023 Location: 74075 Points: 6 |
![]() ![]() ![]() ![]() ![]() |
Yes, but we have a smaller hp tractor with the small 1000 pto and will be sharing equipment.
|
|
![]() |
|
zbum ![]() Bronze Level ![]() Joined: 01 Oct 2023 Location: 74075 Points: 6 |
![]() ![]() ![]() ![]() ![]() |
Ok, so the 7050 or early 7060 would be a direct pto replacement with the smaller pto? Thanks for the info, I will see what I can find. |
|
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 19714 |
![]() ![]() ![]() ![]() ![]() |
540/1000 was always an OPTION in those early days. Many of those 7050/60 tractors never had the option ordered, so they have small 1000.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |