| Author |
 Topic Search  Topic Options
|
Josh Day 
Orange Level
Joined: 29 Nov 2010
Location: Indiana
Points: 3427
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D-17 series 4 wide front question
Posted: 04 Feb 2017 at 2:12pm |
|
Hello all, I'm going to be rebuilding the wide front on my 17, what's the best way to get the steering arms off of the spindle in order to pull spindle from spindle housing? Thanks! Josh
|
|
AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A
|
 |
|
Sponsored Links
|
|
|
Tracy Martin TN
Orange Level Access
Joined: 11 Sep 2009
Location: Gallatin,TN
Points: 10845
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2017 at 2:51pm |
|
The arm has to come off the spindle, you can't drive the spindle thru arm and housing. First remove snap ring,arm comes off from top, remove key and spindle should slide out. A little heat will help.HTH
|
|
No greater gift than healthy grandkids!
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2017 at 8:59pm |
|
Pull the axel out, turn up side down, slide axel back in. Now you can take a big sledge hammer and beat down on it. Good luck. MACK
|
|
Don(MO)
Orange Level
Joined: 12 Sep 2009
Location: Bates City MO.
Points: 6862
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Feb 2017 at 9:51pm |
 MACK wrote:
Pull the axel out, turn up side down, slide axel back in. Now you can take a big sledge hammer and beat down on it. Good luck. MACK
|
X2.
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
