Print Page | Close Window

D-17 series 4 wide front question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134662
Printed Date: 06 Nov 2025 at 3:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D-17 series 4 wide front question
Posted By: Josh Day
Subject: D-17 series 4 wide front question
Date Posted: 04 Feb 2017 at 2:12pm
Hello all, I'm going to be rebuilding the wide front on my 17, what's the best way to get the steering arms off of the spindle in order to pull spindle from spindle housing? Thanks! Josh

-------------
AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A



Replies:
Posted By: Tracy Martin TN
Date Posted: 04 Feb 2017 at 2:51pm
The arm has to come off the spindle, you can't drive the spindle thru arm and housing. First remove snap ring,arm comes off from top, remove key and spindle should slide out. A little heat will help.HTH

-------------
No greater gift than healthy grandkids!


Posted By: MACK
Date Posted: 05 Feb 2017 at 8:59pm
Pull the axel out, turn up side down, slide axel back in. Now you can take a big sledge hammer and beat down on it. Good luck.     MACK


Posted By: Don(MO)
Date Posted: 05 Feb 2017 at 9:51pm
Originally posted by MACK MACK wrote:

Pull the axel out, turn up side down, slide axel back in. Now you can take a big sledge hammer and beat down on it. Good luck.     MACK

X2.


-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.




Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net