![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
D-17 hydraulic leak? |
Post Reply ![]() |
Author | |
farmboy59 ![]() Bronze Level ![]() ![]() Joined: 15 Mar 2016 Location: Gobles Michigan Points: 29 |
![]() ![]() ![]() ![]() ![]() Posted: 14 Oct 2016 at 8:49am |
I have a 59 series one D-17. It has a hydraulic fluid leak and I can't tell where it's coming from. Where it's coming out of is the inspection cover in the torque tube behind the flywheel. Just trying to figure out what I have to do to fix it. So far I just keep oil around to keep the level up so I can use it.
|
|
![]() |
|
Sponsored Links | |
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 21516 |
![]() ![]() ![]() ![]() ![]() |
If it's the round cover on the right side, there's a gasket on that plate. If it's coming from behind the side panels, you'll have to remove the side panel to see where it's coming from.
|
|
![]() |
|
bigredisb ![]() Silver Level ![]() ![]() Joined: 16 Aug 2016 Location: Racine WI Points: 185 |
![]() ![]() ![]() ![]() ![]() |
The other thing I use for hard to find leaks is to put uv dye in the oil that you think is leaking and run it, then check with a UV light. Gives you a perfect look at where its coming from. You can get it at any parts place around here.
|
|
1961 Allis-Chalmers D15
1949 Farmall Super A |
|
![]() |
|
Lynn Marshall ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Dana, Iowa Points: 2352 |
![]() ![]() ![]() ![]() ![]() |
Seal on the input shaft going into the transmission?
|
|
![]() |
|
DSeries4 ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7454 |
![]() ![]() ![]() ![]() ![]() |
inspection cover in the torque tube behind the flywheel.
Could be the rear main seal of the engine or the front seal in the torque tube. I usually replace both whenever I am in there. You will need to split the tractor behind the engine. It is also a good opportunity to check out your clutch assembly. |
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |