body panel bolt sizes

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic


   i'm working on replacing some old panels on a 180 and a d-15.  I'm thinking the anchoring bolts are  going to be either 7/16x18 or 3/8x16, but my shop manual doesn't provide such detail.  As farmers in a rush tended to do they would replace only enough bolts to hold it on.  Over time, the empty holes filled with dirt and grime, rust and whatever else would fit.  Rather than randomly poke around with tapping dies and guess is there a better way.  Right now i'm on the access panel for the 180 brakes.  I'm thinking 3/8x16 but not sure.  the occasional 1/4 inch hole or stud is easy enough, but just wondering if there is a faster way to go about it.  trying not to ram7/16 holes with a 3/8 die

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
edmo Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 13 May 2011 Location: So. Missouri Points: 94	Post Options Post Reply Quote edmo Report Post Thanks(0) Quote Reply Topic: body panel bolt sizes Posted: 14 Apr 2022 at 4:38pm
	i'm working on replacing some old panels on a 180 and a d-15. I'm thinking the anchoring bolts are going to be either 7/16x18 or 3/8x16, but my shop manual doesn't provide such detail. As farmers in a rush tended to do they would replace only enough bolts to hold it on. Over time, the empty holes filled with dirt and grime, rust and whatever else would fit. Rather than randomly poke around with tapping dies and guess is there a better way. Right now i'm on the access panel for the 180 brakes. I'm thinking 3/8x16 but not sure. the occasional 1/4 inch hole or stud is easy enough, but just wondering if there is a faster way to go about it. trying not to ram7/16 holes with a 3/8 die

Sponsored Links

JC-WI Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: wisconsin Points: 34363	Post Options Post Reply Quote JC-WI Report Post Thanks(0) Quote Reply Posted: 14 Apr 2022 at 5:07pm
	Sheet metal on 170 side panels 5/16x18...
	He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that."

DiyDave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 54335	Post Options Post Reply Quote DiyDave Report Post Thanks(0) Quote Reply Posted: 14 Apr 2022 at 5:26pm
	Side panels on D-15 are 1/4"-20...
	Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

edmo Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 13 May 2011 Location: So. Missouri Points: 94	Post Options Post Reply Quote edmo Report Post Thanks(0) Quote Reply Posted: 14 Apr 2022 at 6:17pm
	yep 5/16 not 7. thanks