![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
allis 7060 problem |
Post Reply ![]() |
Author | |
AC 426 power ![]() Orange Level Access ![]() ![]() Joined: 01 May 2012 Location: Ohio Points: 525 |
![]() ![]() ![]() ![]() ![]() Posted: 16 May 2012 at 7:36pm |
Its been idling up on its own i was pulling a 1411 new holland diskbine and when the pto was ingaged it seemed like it had no throttle response and would sorta pop and crack i was running in 5 powershift and slow range it has always done fine before. When pto is disengaged it runs better but still feels like its lacking something. Any thoughts?
|
|
![]() |
|
Sponsored Links | |
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
Gov. linkage hanging up in pump-metering valve may need cleaned. MACK
|
|
![]() |
|
AC 426 power ![]() Orange Level Access ![]() ![]() Joined: 01 May 2012 Location: Ohio Points: 525 |
![]() ![]() ![]() ![]() ![]() |
Yeah im hoping its just in the pump i also forgot to mention the fuel consumption has also increased by a pretty good margin
Edited by AC 426 power - 16 May 2012 at 10:01pm |
|
![]() |
|
injpumpEd ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Walnut IL Points: 5094 |
![]() ![]() ![]() ![]() ![]() |
check boost pressure in intake manifold. It could have had a plug fall out, or blow the manifold gasket. Is it smoking heavy black but no power?
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
![]() |
|
AC 426 power ![]() Orange Level Access ![]() ![]() Joined: 01 May 2012 Location: Ohio Points: 525 |
![]() ![]() ![]() ![]() ![]() |
Yes it is
|
|
![]() |
|
injpumpEd ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Walnut IL Points: 5094 |
![]() ![]() ![]() ![]() ![]() |
also, check to make sure turbo is spinning, and not siezed up. A boost gage will tell a lot.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
![]() |
|
Jim in MO ![]() Silver Level ![]() Joined: 13 Sep 2009 Points: 98 |
![]() ![]() ![]() ![]() ![]() |
check the fuel filter had one , two year ago lose power it was filter. Jim
|
|
![]() |
|
AC 426 power ![]() Orange Level Access ![]() ![]() Joined: 01 May 2012 Location: Ohio Points: 525 |
![]() ![]() ![]() ![]() ![]() |
Thanks for all the help the problem was the primar pump was bad and was sucking air
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |