allis 7060 problem
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50668
Printed Date: 22 Aug 2025 at 1:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis 7060 problem
Posted By: AC 426 power
Subject: allis 7060 problem
Date Posted: 16 May 2012 at 7:36pm
|
Its been idling up on its own i was pulling a 1411 new holland diskbine and when the pto was ingaged it seemed like it had no throttle response and would sorta pop and crack i was running in 5 powershift and slow range it has always done fine before. When pto is disengaged it runs better but still feels like its lacking something. Any thoughts?
|
Replies:
Posted By: MACK
Date Posted: 16 May 2012 at 9:53pm
|
Gov. linkage hanging up in pump-metering valve may need cleaned. MACK
|
Posted By: AC 426 power
Date Posted: 16 May 2012 at 9:58pm
|
Yeah im hoping its just in the pump i also forgot to mention the fuel consumption has also increased by a pretty good margin
|
Posted By: injpumpEd
Date Posted: 17 May 2012 at 11:43am
check boost pressure in intake manifold. It could have had a plug fall out, or blow the manifold gasket. Is it smoking heavy black but no power?
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: AC 426 power
Date Posted: 17 May 2012 at 11:50am
Posted By: injpumpEd
Date Posted: 17 May 2012 at 12:00pm
also, check to make sure turbo is spinning, and not siezed up. A boost gage will tell a lot.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Jim in MO
Date Posted: 17 May 2012 at 5:35pm
|
check the fuel filter had one , two year ago lose power it was filter. Jim
|
Posted By: AC 426 power
Date Posted: 23 May 2012 at 10:49pm
|
Thanks for all the help the problem was the primar pump was bad and was sucking air
|
|