WD Shifter again

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

    Guys, please excuse my ignorance on this matter, but this is the first time I've worked on the WD shifter problem.  I have some more questions.

In the parts and service manuals they show only one snap ring to hold the shift lever into the shifter tower, mine had two snap rings, and the shifter was still loose, can I assume that the tower is worn beyond use?

When installing the shift rod into the tower, I assume all the lugs on the shifter forks should be lined up, and the trans gears in line with the shifter forks, then install the top back on the trans?  Or do I have the sequence wrong?

I have to order a new shifter washer and snap ring, maybe a shifter tower, should I also get a new over sized pivot pin and file to fit, the old one fits fine.

Any and all help will be greatly appriciated.  Thanks, Tim.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Tim in MN Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 17 Jan 2010 Location: Floodwood, MN Points: 20	Post Options Post Reply Quote Tim in MN Report Post Thanks(0) Quote Reply Topic: WD Shifter again Posted: 17 Sep 2011 at 11:28pm
	Guys, please excuse my ignorance on this matter, but this is the first time I've worked on the WD shifter problem. I have some more questions. In the parts and service manuals they show only one snap ring to hold the shift lever into the shifter tower, mine had two snap rings, and the shifter was still loose, can I assume that the tower is worn beyond use? When installing the shift rod into the tower, I assume all the lugs on the shifter forks should be lined up, and the trans gears in line with the shifter forks, then install the top back on the trans? Or do I have the sequence wrong? I have to order a new shifter washer and snap ring, maybe a shifter tower, should I also get a new over sized pivot pin and file to fit, the old one fits fine. Any and all help will be greatly appriciated. Thanks, Tim.

Sponsored Links

David(Stockbridge)MI Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 15 Sep 2009 Location: Stockbridge MI Points: 536	Post Options Post Reply Quote David(Stockbridge)MI Report Post Thanks(0) Quote Reply Posted: 18 Sep 2011 at 7:54am
	all three rails in center condition, then install shift handle washer then snap ring, may require 2nd snap ring to take up play.
	All "NEW" Web Site http://www.djstractorparts.com 2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler

MACK Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 17 Nov 2009 Points: 7664	Post Options Post Reply Quote MACK Report Post Thanks(0) Quote Reply Posted: 18 Sep 2011 at 8:12am
	It is easer to put top on first then install gear shift. MACK