| Author |
 Topic Search  Topic Options
|
Ebys custom cutting 
Bronze Level
Joined: 04 Dec 2017
Location: Oregon
Points: 6
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Hd6
Posted: 04 Dec 2017 at 1:36pm |
|
I'm looking at buying a hd6 anything that I should look out for
|
 |
|
Sponsored Links
|
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 34653
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2017 at 1:53pm |
|
Rails, seals on finals, bad rollers. None of which are available anymore.
|
|
Ebys custom cutting
Bronze Level
Joined: 04 Dec 2017
Location: Oregon
Points: 6
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2017 at 5:48pm |
|
What size cat is hd6 equivalent to
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 42071
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Dec 2017 at 11:05pm |
It's about a 1 1/2 yd loader , the rear housing is same as HD5 as is the track and sprockets - just more links and rollers . Size wise 931 would be similar at 62 HP Production: | | Manufacturer: | Allis Chalmers
| | Factory: | Springfield, Illinois, USA
| | | Variants: | | HD6A: | 44-inch gauge
| | HD6B: | 60-inch gauge
| | HD6E: | 5-roller
| | HD6G: | loader
| | HD6EP: | power shift
| | HD6AG: | turbocharged
| | | | | Allis-Chalmers 5.6L 4-cyl diesel | | full engine details ... | | | Capacity: | | Fuel: | 37 gal [140.0 L]
| | | | | Weight: | 13,400 lbs [6078 kg]
| | Front tire: | tracks
| | Rear tire: | tracks
| | full dimensions and tires ... | | | HD6 Serial Numbers: | | Location: | Serial number stamped on the rear of steering clutch housing (upper-right) or on the instrument panel.
|
- Serial numbers unknown -
|
| | | | Allis Chalmers HD6 Power: | | Drawbar (claimed): | 39 hp [29.1 kW]
| | Belt (claimed): | 54 hp [40.3 kW]
| | Drawbar (tested): | 49.95 hp [37.2 kW]
| | Belt (tested): | 60.51 hp [45.1 kW]
| | power test details ... | | | Mechanical: | | Chassis: | crawler
| | Cab: | Open operator station.
| | | Battery: | | Number: | 2
| | Volts: | 12
| | | Page information: | | Last update: | June 14, 2016
| | Copyright: | Copyright 2016 TractorData LLC
| | Contact: | Peter@TractorData.com
|
|
|
|
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
|
Dozer
Orange Level
Joined: 16 Aug 2011
Location: SW New York
Points: 689
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2017 at 3:38pm |
|
While looking at an HD6 I checked the final drive oil finding it empty. The owner did not know to check the oil and didn't. I think the final drives and steering clutches are the most difficult repairs so that is what I check first. Try to get a 1964 or newer.
|
|
Ray54
Orange Level Access
Joined: 22 Nov 2009
Location: Paso Robles, Ca
Points: 4783
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Dec 2017 at 7:08pm |
|
A D4 D would be a comparable Cat dozer.
|
|
