Tractor opinions

I have always used/bought older implements and newer tractors.  Was given a JD model A. The ease of maintenance of this machine  has got me thinking. All my old implements are very easy to fix and keep going,  New Tractors not so much. Seems I have to pay 100.00 or more per hour to get it worked on. Not having the ability to read the computer codes is a big minus. Thinking of cashing in my newer  computer tractor for an older model. Right now I am running a 83 HP 4WD.  My first cab tractor, which, once I got use to it is kind nice. But do not need a cab.  My largest HP requirement is a 10 foot 3 pt tandem disk. Next are the round baler and  disc mower which have 50 hp minimums.  Also need a loader.  Round baler requires 2 remotes. I produce my own Bio diesel,  but thinking of giving propane a try. Do not want a gas. Would a D-17 LP fit my needs? 

You're not going to have enough power

180 or 185 and even a 200 is a great option

I would go for a good 185 or 200 with hydrulic PTO option, the D17 will be stretched to thin. These will handle most all needs. Kevin

why not get 2 tractors?  Get the D17, and get another newer Allis with some more Ponies...

Not an AC but you might want to check out an Oliver 1650 be about perfect for your needs.

We run Olivers for the big tractors on our haying operation and they are nice to run. We have a 1655 that would be about what you need or rather than a D17, see if you can find a D19? We also have a 1755 that is a nice tractor. I do prefer the old ones myself for ease and cost of service. Even with parts sometimes being more expensive because there is a limited market it is still way cheaper than fixing computers and sensors with the laptop the dealer has.

The 6060,6070 and 6080 were very good tractors. My dads 6060 has been a great tractor, bought new in 1981. In need of a clutch right now, but has been a fuel sipper with plenty of power. Was dynoed when new and it put out 82 hp well beyound the 63 advertised. The 6080 I'm sure put out close to 100 hp since they were intercooled. No computer on either tractor. Of course FWD was an option on both tractors.

where are you at in texas,westfork?????

As much as I love my d17 which is gas I don't find the 226 very fuel efficient.   It is a good tuff motor and I am rebuilding it but it uses alot of fuel. I don't that that would be much different with the LP it is still the same basic motor. I would agree with the guys saying look for a 185 it will be a bit more power and better on fuel. I would say drive an Oliver before you buy one. I looked at one an 1850 I think it had a blown motor so I didn't drive it but the 12 speed transmission had an odd shift pattern my uncle told me he was glad I didn't pick it up for short money because he never could get the hang of those shift patterns. I never got far enough with it to find out the owner thought it was worth too much in the end i think the scrapped it out instead of selling it.

Thanks for all of the information.  

The 6000 series are a great recommendation.  Just remember it is a Fiat tractor with the best  Allis engine AND make sure the PTO clutch works properly.  They have a weird duel clutch.  6060 has 8 speeds and the 6070 and 6080 have 12.

ive spent a lot of time on a 1655 diesel with a 18 speed hydraul-shift. good tractor. not too bad on diesel. biggest thing I didn't like about it was the PTO, but the clutches on it where shot and we had the lever adjusted so you really had to shove it back to keep the baler off.

190 XT would be the ideal tractor for you I think. you can pull bigger stuff in the future as well

Spent some time searching on the internet the last few days.

I would think that round baling without a kicker on a 190 would be a pain. Starting and stopping the baler won every bale to backup?

I totally believe you on the 70 hp because my d17 does way more work then I have any right to expect of it but yes she does like to drink.