| Author |
 Topic Search  Topic Options
|
Mrgoodwrench 
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190 no hydraulics
Posted: 30 Aug 2016 at 9:26am |
|
Got to play with our "new" series I xt this weekend. Originally we bought it for parts but now think we are gonna save it and make a loader out of it. It gets water in the engine oil but I've fixed 3 of those so far so not unfamiliar with that but it has no hydraulics at all. No lift drive or steering. Oil is full pump is quiet. Is there anything besides a pump that could cause this? Also we did get coolant running out of the bell housing or above when we winched it onto the trailer...is there a soft plug in the rear of block? I've never had a 301 completely out of frame...this one will be coming out as the rear seal is out of it.
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
 |
|
Sponsored Links
|
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Aug 2016 at 8:13pm |
|
Has anyone heard of a broken pump shaft? Haven't got it apart yet bet tractor
Lost all bus power at once...seems kinda odd
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Aug 2016 at 10:18pm |
|
Pump has lost prime or striped splines from drive gear. MACK
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Aug 2016 at 10:44pm |
|
It stopped on the previous owner while running a brush hog for a few hours so I doubt it lost prime so I guess I'll check the splines. I'll probably just wait till I pull the engine
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Sep 2016 at 9:09am |
|
Looking a littler more I found out the hyd level was near empty when it got hauled but my FIL had filler it before I got there. So I'd better make sure the pump has not lost prime....so how do I do that
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
