| Author |
 Topic Search  Topic Options
|
KJCHRIS 
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 1006
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D21, 210, 220 Rear Axle Diameter;
Posted: 26 Apr 2022 at 12:11am |
Asking a question; Are the rear axles on D21 / 210 / 220 the same 3.25" diameter as on a 200 ? IF yes are the wedges and cast wheels interchangeable? I've a cracked rear wedge and my renter thinks he know where a D21 or 210 parts tractor may be setting.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22834
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2022 at 6:11am |
|
D-21 and 200 and 190/190XT above s/n 9001 are the same 3.25" axle diameter. 210/220 are 3 5/8" and use a different two-piece clamp.
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5205
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2022 at 7:53am |
|
7000 tractor also uses 3.25 axles, and many came with 38's.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 1006
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Apr 2022 at 10:39pm |
Dr Allis and Inj Ed thanks to both of you for the answers.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
JC-WI
Orange Level Access
Joined: 11 Sep 2009
Location: wisconsin
Points: 34636
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2022 at 2:44pm |
|
And don't forget about some D21's had a rearend transplant from the 210 tractors
|
|
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22834
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2022 at 4:04pm |
|
????? There were many D-21 rear ends that got 210/220 ring and pinion gear sets installed (in a D-21 rear end housing) to increase the speeds 10%, but only on pulling tractors. I don't know what else you would be referring to, as a 210/220 rear end assembly would lengthen the wheelbase on a D-21 by maybe 4 to 5 inches ??
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5205
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2022 at 4:20pm |
|
Yea, there's a few around, you can tell by the rear tire and fender curve don't match up right.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 1006
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2022 at 12:55am |
Drove down to look at tractor. It's a 200 bare back, 3 bad tires but all parts still on it.. IF new owner of this farm will sell the tractor I plan to make offer & maybe drag it home for parts. They bought the farm from an estate about 3 years ago tractor and few old implements setting in buildings. THey haven't cleaned building site yet, took out all fences and 2 large piles of trees.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
