D21, 210, 220 Rear Axle Diameter;
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187882
Printed Date: 07 May 2025 at 6:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D21, 210, 220 Rear Axle Diameter;
Posted By: KJCHRIS
Subject: D21, 210, 220 Rear Axle Diameter;
Date Posted: 26 Apr 2022 at 12:11am
|
Asking a question; Are the rear axles on D21 / 210 / 220 the same 3.25" diameter as on a 200 ? IF yes are the wedges and cast wheels interchangeable? I've a cracked rear wedge and my renter thinks he know where a D21 or 210 parts tractor may be setting.
-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
Replies:
Posted By: DrAllis
Date Posted: 26 Apr 2022 at 6:11am
|
D-21 and 200 and 190/190XT above s/n 9001 are the same 3.25" axle diameter. 210/220 are 3 5/8" and use a different two-piece clamp.
|
Posted By: injpumpEd
Date Posted: 26 Apr 2022 at 7:53am
7000 tractor also uses 3.25 axles, and many came with 38's.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: KJCHRIS
Date Posted: 26 Apr 2022 at 10:39pm
|
Dr Allis and Inj Ed thanks to both of you for the answers.
-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
Posted By: JC-WI
Date Posted: 27 Apr 2022 at 2:44pm
And don't forget about some D21's had a rearend transplant from the 210 tractors
-------------
He who says there is no evil has already deceived himself
The truth is the truth, sugar coated or not. Trawler II says, "Remember that."
|
Posted By: DrAllis
Date Posted: 27 Apr 2022 at 4:04pm
|
????? There were many D-21 rear ends that got 210/220 ring and pinion gear sets installed (in a D-21 rear end housing) to increase the speeds 10%, but only on pulling tractors. I don't know what else you would be referring to, as a 210/220 rear end assembly would lengthen the wheelbase on a D-21 by maybe 4 to 5 inches ??
|
Posted By: injpumpEd
Date Posted: 27 Apr 2022 at 4:20pm
Yea, there's a few around, you can tell by the rear tire and fender curve don't match up right.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: KJCHRIS
Date Posted: 28 Apr 2022 at 12:55am
|
Drove down to look at tractor. It's a 200 bare back, 3 bad tires but all parts still on it.. IF new owner of this farm will sell the tractor I plan to make offer & maybe drag it home for parts. They bought the farm from an estate about 3 years ago tractor and few old implements setting in buildings. THey haven't cleaned building site yet, took out all fences and 2 large piles of trees.
-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|