| Author |
 Topic Search  Topic Options
|
orangereborn 
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: INJECTOR PUMPS
Posted: 13 Apr 2019 at 1:08am |
Do these two injector pumps interchange? Or what do I need to know to be certain...
MODEL 'RPM SERIAL# MFG# DBGFC 637--75AF 2000 1634845 4022404
DBGFC 637--49AF 2200 1115435 4021516
THANKS.....DALE
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22827
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 6:58am |
|
What did they come off of ??
|
|
Alvin M
Orange Level
Joined: 24 Jun 2018
Location: PA
Points: 822
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 6:59am |
|
DBGFC637-75AF is for 180 DBGFC637-49AF is for 190xt fuel setting is less on the 180 they will fit both
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5204
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 7:49am |
|
Mostly the same, a few differences in settings mostly. Like said above the 49AF is an XT, the 75AF is 180, both non advance. Use the XT pump on a 180 and just torque screw in for the non turbo engine.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 10:20am |
 injpumpEd wrote:
Mostly the same, a few differences in settings mostly. Like said above the 49AF is an XT, the 75AF is 180, both non advance. Use the XT pump on a 180 and just torque screw in for the non turbo engine. |
ED...The XT pump and 2200 RPM would be similiar to the 185?? Or the 180 pump turned up to 2200??
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 10:27am |
DrAllis wrote:
What did they come off of ?? |
I have several pumps around here and am not sure but trust the responses are probably the case...Just want to have a pump ready for the 180 if needed..Thank ....Dale
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 10:33am |
|
I have always been intrigued by the injector system but have never had the need to know more. I have followed the discussions and retain the posted information. That has changed because I now have a one-eighty that has a perceived fuel/pump problem. So I have now decided it is time to throw my why/if's out there for the experts. And I want to keep it as short as possible. Sediment bowl gasket and screen? Although the parts book show different parts for the diesel and gas systems does that difference still apply? From what I run into It appears that one version is now used everywhere. In some situations the screen is in the bowl recess below the gasket and others the screen is hanging on the base on top of the gasket. The last question for now is the removal of the valve on the injector return line. The question to a popular Rebuilder about the current 180 problem I was told to remove that valve. I do not have one system that any longer has that valve in it. So I asked what is the purpose of that valve and does it need to be replaced. That person didn't know. Thanks everyone for your input... Dale
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 10:36am |
Alvin M wrote:
DBGFC637-75AF is for 180 DBGFC637-49AF is for 190xt fuel setting is less on the 180 they will fit both |
Alvin..Could one of the versions on the 200 be similiar??? Thank to helping...Dale
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5204
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Apr 2019 at 11:06am |
|
The 185 is set closer to the 190 non turbo. Some later 180, 185, 190XT used a pump with advance as well. Any one of them could be rebuild as a core by a competent shop to put on to your 180.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Apr 2019 at 3:43pm |
|
I have the lines off the 180 and I have not yet checked, but are the spacer/holders on the line clamps still available? The old one's are brittle and broken. Thanks...Dale
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Apr 2019 at 12:41pm |
Got the pump off the sputtering 180 and this apparantly is the culprit....Also has 4020510 injector tips...190's??? Dale
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5204
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Apr 2019 at 12:57pm |
|
Typical broken down flex ring.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1537
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 May 2019 at 1:19pm |
|
The injector pump inspection cover gasket on the 180 timing cover. Thin paper or thicker material. Have one off that had no gasket.....Thanks....Dale
|
|
Tracy Martin TN
Orange Level Access
Joined: 11 Sep 2009
Location: Gallatin,TN
Points: 10937
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 May 2019 at 10:37pm |
|
Dale, it is a thinner rubber material. My 185 has the same problem right now. Tracy
|
|
No greater gift than healthy grandkids!
|
|
