| Author |
 Topic Search  Topic Options
|
den/southern illinoi 
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 2059
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 720 etc roto tiller and sickle mower for sale
Posted: 13 Jun 2021 at 11:01am |
Time to start down sizing as we may be selling our shop etc. this fall. The tiller is currently set up to run 540 rpms. We changed the gearing in the chain area to do this plus changed the pto shaft. I have everything to convert it back to the pto speed for the 720s etc. I can send pictures if you give me your e mail. Asking $800.00 or make an offer. Located in Southern Illinois. The sickle mower is in good usable shape. Cuts as it should so not much more to say about it other than you must have the same mule as used for the belly finish mower to mount. It also uses a longer and heavier lift cable on the right side which comes with the mower. Again, I can send pictures with your emaiil address. Asking $900.00 for it or make an offer.
Buy the pair and save $100.00 so both for $1,600.00.
PMs work best. Den
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
 |
|
Sponsored Links
|
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 5139
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2021 at 2:38pm |
|
Den, I’m shocked they didn’t sell 5 minutes after you posted. 2 of my favorite attachments I use on my 720’s. Sickle mower stays on one of the 720’s, used almost weekly. Both do a great job. Getting hard to find.
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
den/southern illinoi
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 2059
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2021 at 1:32pm |
|
Make an offer...I may take it!!! Den
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
|
DCAC
Orange Level
Joined: 20 Oct 2018
Location: east central SD
Points: 511
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2021 at 8:43pm |
|
PM sent
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 5139
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2021 at 10:16pm |
|
Den, if you don’t mind, can you measure your mower right side lift cable eyelet to eyelet please? I made a few of these from 1/4” cable and it works great. I just want to make sure I got the measurement close. Mine lifts fine and has held up well. If I remember its like 65”? You can buy the left cable but not the right lift cable. Darn B&S quit making them after the buyout.
Thanks
Robbie
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
den/southern illinoi
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 2059
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Jun 2021 at 11:50am |
|
Mine measures 68 inches.
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
|
