Classifieds - 720 etc roto tiller and sickle mower for sale

720 etc roto tiller and sickle mower for sale

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181168
Printed Date: 20 May 2024 at 12:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 720 etc roto tiller and sickle mower for sale

Posted By: den/southern illinoi
Subject: 720 etc roto tiller and sickle mower for sale
Date Posted: 13 Jun 2021 at 11:01am

Time to start down sizing as we may be selling our shop etc. this fall.

The tiller is currently set up to run 540 rpms. We changed the gearing in the chain area to do this plus changed the pto shaft. I have everything to convert it back to the pto speed for the 720s etc. I can send pictures if you give me your e mail. Asking $800.00 or make an offer. Located in Southern Illinois.

The sickle mower is in good usable shape. Cuts as it should so not much more to say about it other than you must have the same mule as used for the belly finish mower to mount. It also uses a longer and heavier lift cable on the right side which comes with the mower. Again, I can send pictures with your emaiil address. Asking $900.00 for it or make an offer.

Buy the pair and save $100.00 so both for $1,600.00.

PMs work best. Den

-------------

Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20
2-5015, 5020 and associated equipment and 2 electric forklifts.

Replies:

Posted By: AC720Man
Date Posted: 14 Jun 2021 at 2:38pm

Den, I’m shocked they didn’t sell 5 minutes after you posted. 2 of my favorite attachments I use on my 720’s. Sickle mower stays on one of the 720’s, used almost weekly. Both do a great job. Getting hard to find.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: den/southern illinoi
Date Posted: 15 Jun 2021 at 1:32pm

Make an offer...I may take it!!! Den

-------------

Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20
2-5015, 5020 and associated equipment and 2 electric forklifts.

Posted By: DCAC
Date Posted: 15 Jun 2021 at 8:43pm

PM sent

Posted By: AC720Man
Date Posted: 15 Jun 2021 at 10:16pm

Den, if you don’t mind, can you measure your mower right side lift cable eyelet to eyelet please? I made a few of these from 1/4” cable and it works great. I just want to make sure I got the measurement close. Mine lifts fine and has held up well. If I remember its like 65”? You can buy the left cable but not the right lift cable. Darn B&S quit making them after the buyout.
Thanks
Robbie

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: den/southern illinoi
Date Posted: 16 Jun 2021 at 11:50am

Mine measures 68 inches.

-------------

Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20
2-5015, 5020 and associated equipment and 2 electric forklifts.