| Author |
 Topic Search  Topic Options
|
twinson 
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 90
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Allis Sae 20W20 barel of oil.
Posted: 04 Oct 2026 at 10:24pm |
|
I have a sealed 55gallon barrel of Sae 20W20 oil from Allis. I no longer need this. Any interest. Thank you. Jim
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 23572
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Oct 2026 at 11:15pm |
|
Hydraulic oil ?????
|
|
twinson
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 90
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 hours 53 minutes ago at 7:48am |
Barrel is labeled SAE so I was thinking Motor Oil.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 23572
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 hours 48 minutes ago at 9:53am |
|
Probably a gasoline engine type of oil, I'd imagine.
|
|
john2189
Silver Level
Joined: 11 Sep 2009
Location: Minerva,Ohio
Points: 444
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 hours 21 minutes ago at 10:20am |
|
Hydraulic oil is labeled SAE too
My mistake, hydraulic oil is aw or iso
Edited by john2189 - 15 hours 16 minutes ago at 10:25am
|
|
'41 Allis B
'49 Farmall Cub
|
|
twinson
Bronze Level
Joined: 17 Aug 2019
Location: IL
Points: 90
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 hours 20 minutes ago at 12:21pm |
|
I was thinking WD-45, D17, D19 as we used to have those tractors for light duty use.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 93259
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 hours 47 minutes ago at 12:54pm |
|
SAE is Society of AUTOMOTIVE ENGINEERS... which means the oil must be ENGINE COMPATABLE... 20W20... basiclly means its a straight 20wt engine oil.... You can use 2owt engine oil as HYDRAULIC oil in most of the older tractors... maybe pre 1960..
|
|
Like them all, but love the "B"s.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 93259
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 hours 42 minutes ago at 12:59pm |
|
newer HYDRAULIC OILS are labeled "AW" .. which means it has ANTI WEAR addatives in it specifically for valves, pistons and pumps... normally with anti FOAM additives also..
|
|
Like them all, but love the "B"s.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 23572
|
Post Options
Thanks(0)
Quote Reply
Posted: 6 hours 58 minutes ago at 6:43pm |
|
Well, if it says ALLIS-CHALMERS on the barrel, it should be pre-1985 for age, which would make it 40 years old minimum. From about 1970 onward, the hydraulic oil was "Power Fluid 821", which was used in transmissions and hydraulic systems. In a D-19 owners manual, the hydraulic oil requirement was SAE 20-20W non-detergent of "ML" service classification. It's hard for me to believe there isn't anything else printed on the barrel to help figure out what type it is.
|
|
Les Kerf
Orange Level
Joined: 08 May 2020
Location: Idaho
Points: 1921
|
Post Options
Thanks(0)
Quote Reply
Posted: 6 hours 21 minutes ago at 7:20pm |
|
My late Father-in-law ran Pennzoil 20W20 motor oil in his vehicles and the WD Allis year 'round. I haven't seen it for sale in many years now.
|
|
