7000 Black Belly Hydraulic Problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a Black Belly 7000. When I turn the steering wheel the relief valve squeals but the wheels turn as they should. Also if raising the three point and turning the wheels at the same time the three point will stop lifting. Any ideas?

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
BrianWI Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 11 Sep 2009 Location: northeast wi Points: 27	Post Options Post Reply Quote BrianWI Report Post Thanks(0) Quote Reply Topic: 7000 Black Belly Hydraulic Problem Posted: 16 Mar 2017 at 7:30pm
	I have a Black Belly 7000. When I turn the steering wheel the relief valve squeals but the wheels turn as they should. Also if raising the three point and turning the wheels at the same time the three point will stop lifting. Any ideas?

Sponsored Links

tbran Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 14 Sep 2009 Location: Paris Tn Points: 3539	Post Options Post Reply Quote tbran Report Post Thanks(0) Quote Reply Posted: 16 Mar 2017 at 8:33pm
	the flow divider is stuck in the rear of the hyd pump. 70260910 - goto agcopartsbook.com and look it up.. Remove and clean - note how it is oriented for reinstallation.
	When told "it's not the money,it's the principle", remember, it's always the money..

MACK Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 17 Nov 2009 Points: 7664	Post Options Post Reply Quote MACK Report Post Thanks(0) Quote Reply Posted: 17 Mar 2017 at 9:00am
	Steering relief valve may also need set up. A little normal on a 7000, they needed a bigger steering cylinder. MACK

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 22170	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 17 Mar 2017 at 12:17pm
	I had one black 7000 that had a hard effort steering situation and a squealing relief valve too. This also would apply to a maroon 7000 as well. We started with the obvious and jacked up the front wheels and greased the spindles liberally. Even with the front wheels off the ground, the steering effort was high and the relief was squealing when steering it. Flow divider/priority valve spool wasn't stick or plugged. In the end, the problem was something I'd never seen before or ever again. We took the orbitrol apart and found several of the center spool holes PLUGGED with pieces of white Teflon seal bits. Our theory was the Customer had a bad cylinder on an implement the Spring before and the pieces made their way thru the return circuit (unfiltered)into and thru the pump and finally got stuck in the orbitrol. Whodda thunk that would ever happen ??

BrianWI Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 11 Sep 2009 Location: northeast wi Points: 27	Post Options Post Reply Quote BrianWI Report Post Thanks(0) Quote Reply Posted: 18 Mar 2017 at 5:20pm
	Update to what I found. I removed the plug on the priority valve and found parts of the sealing ring from behind the wear plates in the spring. I removed the pump and disassembled it finding a hole in one of the wear plates. I also removed the relief valve and the poppet is pitted on the sealing surface. Are these poppets available? What else should I look for. Edited by BrianWI - 18 Mar 2017 at 7:39pm