This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
HD 6 Steering Clutch Cover Plate Gaskets |
Post Reply |
Author | |
orangeman
Orange Level Joined: 12 Sep 2009 Points: 1688 |
Post Options
Thanks(0)
Posted: 30 Jun 2012 at 9:19am |
Guys - Do you know of any vendors that sell the fiber gasket that goes between the steering clutch cover and the final drive housing.
Also, inside the steering clutch housing there is a little 1/4 pipe with a cap on it. It is plumb vertical then turns 90 degrees and is terminated into the final drive. Is this assembly intended to be an oil port for the bearings? Orangeman
|
|
Sponsored Links | |
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41217 |
Post Options
Thanks(0)
|
That line is a oil feed to the clutch bearing , it is a felt wick that is suppose to pick up oil from ring and pinion case and transfer it to bearing .
Best thing to do with that is remove the hose from case and install pipe plug, then route hose to outside case and install a grease nipple so as gun grease can be used for bearing lube. For the gasket for the clutch housing, make your own from cereal box, or put a bead of silicone on tractor housing , let it dry , then install cover on top of bead.If drain hole in case is kept open no problems as moisture will drain through.
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |