| Author |
 Topic Search  Topic Options
|
wsmsrs 
Bronze Level
Joined: 12 May 2012
Points: 5
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 PTO
Posted: 12 May 2012 at 6:05pm |
|
|
 |
|
Sponsored Links
|
|
|
norm[ind]
Orange Level
Joined: 29 Oct 2010
Location: bourbon,ind
Points: 2992
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2012 at 6:28pm |
|
no message?????????????
|
|
Boogerowen
Orange Level
Joined: 23 Apr 2011
Location: Mannford Ok
Points: 431
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2012 at 9:02pm |
|
Forgot what he wanted to say !!!
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5899
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 12:45am |
New member Joined and posted, May not be familar with the system. Gary
|
|
Dave H
Orange Level
Joined: 11 Sep 2009
Location: Central IL
Points: 3577
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 6:48am |
I hope he is not like me. Sometimes I go to the house to get somethinng and forget what it was on the way. 
|
|
wsmsrs
Bronze Level
Joined: 12 May 2012
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 6:12pm |
|
My d15 PTO stop working as I was Bush Hogging.Drive shaft & universal joints OK.Does PTO have shear pin inside?
|
|
dscott
Silver Level
Joined: 05 May 2012
Points: 81
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 6:25pm |
Unless the d15 is differant then a d14. There is no shear pin that I seen in mine. However there is a split pin on the actuator in the powwer director which cycles the PTO shift collar. Are you sure your lever is in the correct postion? Not havein been bumped out of gear or something.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21831
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 7:12pm |
|
Provided the pto shifter lever feels normal ( when pulled rearward it only goes straight "up") and there is no unusual gear noise coming from under the dashboard area, I'd guess maybe you have twisted off the pto shaft under the seat where it is machined down in diameter for clearance. This would be a "first" in my books. With the engine off and pto shifter lever forward and in gear, if you can turn the pto shaft by hand it, must be twisted off inside the rear end.
|
|
norm[ind]
Orange Level
Joined: 29 Oct 2010
Location: bourbon,ind
Points: 2992
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 7:13pm |
|
could have shear pin on mower
|
|
wsmsrs
Bronze Level
Joined: 12 May 2012
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 7:26pm |
|
Before the problem the shift lever was very hard to move. I will test to see if shaft is broken.Were can I find a print of the broken area when I find it.Thanks for the info.
|
|
Dusty MI
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5059
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2012 at 9:18pm |
A parts book is a great reference. It shows all the parts of the tractor and how lay in the tractor.
And welcome to to the best web site on the web. We have a great family here.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
wsmsrs
Bronze Level
Joined: 12 May 2012
Points: 5
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 May 2012 at 7:52am |
|
Thanks Dusty,Ill check it out. Bill
|
|
