| Author |
 Topic Search  Topic Options
|
FREEDGUY 
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Clutch Pedal Free Play
Posted: 22 Jun 2019 at 5:23pm |
Just exactly what is the "free play"? Is it from all-the-way depressed(down) and the measurement until the tranny starts to engage ? Or the measurement of the pedal-up from the "up-engaged" position until the clutch dis-engages? This happens to be on a XT diesel that as of this spring, has about 3/4 " of travel between the "up-engaged" and dis-engaged portion  . Pretty sure this is not correct, yet the clutch itself does not slip. Just looking for some insight so I can get some "ducks in a row" until I'm able to get back out to the farm.We do have an ITT manual that I hope can't be too bad for a linkage adjustment. Thanks
Edited by FREEDGUY - 22 Jun 2019 at 5:24pm
|
 |
|
Sponsored Links
|
|
|
Jim.ME
Orange Level
Joined: 19 Nov 2016
Location: Maine
Points: 962
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jun 2019 at 6:06pm |
Free play is the pedal travel measured from the pedal at rest against its stop (when the clutch is engaged) to the point where the throwout bearing contacts the pressure plate fingers. Sorry its from a JD manual, but it is one I was able to find easily. Clutch_pedal_freeplay.pdf
|
|
WF owner
Orange Level
Joined: 12 May 2013
Location: Bombay NY
Points: 5012
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jun 2019 at 6:29pm |
|
In short, it's the distance from when you first touch the clutch pedal and when you start to feel the clutch engaging. It's the distance the clutch pedal moves freely, without doing anything.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21834
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Jun 2019 at 7:59pm |
|
Adjust freeplay on a 190XT to 4 inches and as long as the clutch fully releases when clear down, leave it like that..
Edited by DrAllis - 22 Jun 2019 at 8:00pm
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jun 2019 at 8:04pm |
|
Made it out to the farm today and did some investigating. Pedal had 2 and 1/4" free play (made a jig to make measurements as exact as possible) and started turning the bell on the clutch rod until I got to 3 1/2" of "play"; that was ALOT of turning!! I stiil have plenty of threads left to hit the 4"# that Doc recommended but I chickened out until I start up and see how it acts. Any idea of what I can expect=less gear clash when shifting,smoother shifting or neither ? Possibly less wear/tear on throw out bearing? BTW, we do our best to not grind the gears, but sometimes it seems to take awhile for the tranny to slow down/stop to switch gears (always has). The worst shift is from what I will call 3'rd (5/6) to 4'th(7/8) on-the-go so we don't have to start out in 4'th from a dead stop. Thanks for the replies!!
|
|
Lonn
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29805
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jun 2019 at 7:09am |
|
Like the Dr said. It's just the distance the clutch pedal can travel without doing anything. No jig needed, just a tape measure. There is no transmission brake so that's why the gears will clash easier. Takes patience to shift transmissions without a brake or sycronizers. If you think it takes awhile to shift a 190, personally I don't, but try shifting a B or C. They spin a long time.
Edited by Lonn - 24 Jun 2019 at 7:13am
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21834
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jun 2019 at 7:35am |
|
If you are in a hurry, stick it into LOW gear first to stop things. Low gear turns slower for less grinding. Nobody uses low gear anyway.
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8612
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jun 2019 at 8:58am |
 DrAllis wrote:
If you are in a hurry, stick it into LOW gear first to stop things. Low gear turns slower for less grinding. Nobody uses low gear anyway. |
agree for the most part cept 1st is 5th on the 220 and thats the field working gear.Still bang it in that one as it is the slowest
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jun 2019 at 4:39pm |
DrAllis wrote:
If you are in a hurry, stick it into LOW gear first to stop things. Low gear turns slower for less grinding. Nobody uses low gear anyway. |
The only reason "I" am in a hurry to shift out of 5/6 into 7/8 is pulling out of the field onto the county road pulling 500 bushels of grain in 2 gravity wagons to get out of the way of "citiots", normally we drag wagons threw the field unless horribly wet. have a BAD feeling it's going to be "THAT" year, LOL!! Thanks again for all input !
|
|
CTuckerNWIL
Orange Level
Joined: 11 Sep 2009
Location: NW Illinois
Points: 22825
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jun 2019 at 7:03pm |
FREEDGUY wrote:
BTW, we do our best to not grind the gears, but sometimes it seems to take awhile for the tranny to slow down/stop to switch gears (always has). The worst shift is from what I will call 3'rd (5/6) to 4'th(7/8) on-the-go so we don't have to start out in 4'th from a dead stop. Thanks for the replies!! |
If you do your best to not grind gears, you start the engine while it is in gear, with the clutch disengaged and LEAVE it in gear till the wheels are STOPPED when wanting to shift to another gear. It's easier and cheaper, to replace a clutch if you HAVE to slip it a bit starting out on the road with a load, than it is to tear the tranny all apart to fix the shelled off splines on the gears and collars.
|
|
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Nov 2019 at 5:42pm |
I made the clutch pedal adjustment about 3 months ago, but sadly just fired up the old gal Saturday afternoon due to a leaky valve stem/calcium issue to get it to a water source to do a MAJOR flushing  . I must admit there was much less "growling" (not grinding) of shifting gears between F/R between 2/3/R. I should have looked into this several years ago. Thanks again to all that replied, especially the "DOC".
|
|
