| Author |
 Topic Search  Topic Options
|
dnel45 
Bronze Level
Joined: 13 Oct 2009
Location: Northwest Ohio
Points: 170
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: AC 1300 FC wheel hub
Posted: 13 Jun 2026 at 7:29am |
|
Had a bearing go out and it trashed the hub out pretty good, cleaned it up but new bearings are sloppy in it. Anyone have a good used hub around? Agco wants $589 for one.
|
 |
|
Sponsored Links
|
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 4450
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2026 at 7:31am |
I might have a couple from a 1200, likely the same. Will look today.
Edit; Since I have developed the habit of posting and forgetting, put my shoes on and went for a walk. I do have one, missing the bearing cap but they aren't hard to find. Took a couple pictures, call/text me, 641-521-3575, Mike.
Edited by IBWD MIke - 13 Jun 2026 at 7:40am
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1663
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2026 at 8:01am |
|
Can you peen the hub to get you going?? I have done that to hubs if not too badly worn! May help for a while.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 5459
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2026 at 3:23pm |
|
Look into generic wagon hubs. AC wasn't one to design a specific part if something off the shelf would suit.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
Daehler
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1191
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2026 at 8:22pm |
|
I have some
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
|
dnel45
Bronze Level
Joined: 13 Oct 2009
Location: Northwest Ohio
Points: 170
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jun 2026 at 8:43pm |
|
Hey Mike thanks for checking - is it a 6 bolt hub?
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 4450
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2026 at 9:50am |
 dnel45 wrote:
Hey Mike thanks for checking - is it a 6 bolt hub? |
No, mine are 4-bolt.
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3801
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jun 2026 at 7:11am |
|
dNel45, try using a sharp center punch to divot the hub’s inner housing. Punch ever 1/2 inch inside the hub’s bearing housing to decrease its inner diameter, then press in new bearing races.
|
|
Ed (Ont)
Orange Level
Joined: 08 Nov 2009
Location: New Lowell, Ont
Points: 1663
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jun 2026 at 7:53am |
AC7060IL wrote:
dNel45, try using a sharp center punch to divot the hub’s inner housing. Punch ever 1/2 inch inside the hub’s bearing housing to decrease its inner diameter, then press in new bearing races. |
Yes exactly what I suggested. Also Permatex has a race retaining product that helps. I have used it. Will try to get a picture for you. Have some in shop.
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 9236
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Jun 2026 at 7:19pm |
|
Center punch and red loctite works pretty good.
|
|
