| Author |
 Topic Search  Topic Options
|
DSeries4 
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7644
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 185 Bearing carrier
Posted: 22 Apr 2019 at 9:26am |
While taking the brakes off, I also removed the bearing carrier off the right side to put in a new seal and O ring. I noticed this one has no lip for the back of the oil seal to mate to. The left side had one and the ones on my D17 diesel had them.
Should I find one that has a lip? IF not, how far do I knock in the new seal? There is no place for it to stop.
Edited by DSeries4 - 22 Apr 2019 at 9:26am
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22864
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 10:50am |
|
Just get it flush/square on one side or the other, usually from the inside. Take notice..... you'd better have the axle square to the seal or you'll ding the seal when going together.
Edited by DrAllis - 22 Apr 2019 at 10:51am
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7644
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 8:02pm |
|
Thanks Doc! I'll tackle it next weekend. People might not say it enough, but your advice and wisdom are most certainly appreciated here!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
sparky
Orange Level Access
Joined: 13 May 2011
Location: So. Indiana
Points: 1839
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 9:08pm |
|
DITTO !!!!
|
|
It's the color tractor my grandpa had!
|
|
