Allis-Chalmers HD-11E Info

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Hello Everyone,

I am from Northern Utah. My Dad (passed away a few years ago) picked up this HD-11E for his construction business about 30 years ago. After he got it, he repainted it to the Construction Yellow and maintained and operated it for the remainder of his years with his business. A few weeks ago, I went and topped off all the fluids and put some new batteries in it and it started right up! The ol' dozer still runs like a dream!
I brought it home to move a little dirt for a project and to give it some TLC. It has sat for a few years, and the finals are leaking a little bit, the rams are leaking a little hydraulic fluid. The other thing is that the friction section for the throttle won't hold the throttle in place anymore, to bypass this we have used a pair of trusty vice grips to hold the throttle.
My dad and his mechanic friend (who has also passed away) did all the maintenance and fixing for stuff like this on this machine. I've tried to look for his service manuals but have had no luck.
In short, I guess what I'm asking for is any advice on how to address the friction section on the throttle and how extensive would it be to go through and fix the small leaks for the finals and the hydraulics? Also open to any other information as far as gotcha's, what to look out for's, tips & tricks, or anything else for the HD-11E's.
Any info would be awesome and much appreciated!

Thanks!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Rocky-Mnt-Hull Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: Yesterday Location: Logan, Utah Points: 6	Post Options Post Reply Quote Rocky-Mnt-Hull Report Post Thanks(0) Quote Reply Topic: Allis-Chalmers HD-11E Info Posted: 12 hours 39 minutes ago at 9:34pm
	Hello Everyone, I am from Northern Utah. My Dad (passed away a few years ago) picked up this HD-11E for his construction business about 30 years ago. After he got it, he repainted it to the Construction Yellow and maintained and operated it for the remainder of his years with his business. A few weeks ago, I went and topped off all the fluids and put some new batteries in it and it started right up! The ol' dozer still runs like a dream! I brought it home to move a little dirt for a project and to give it some TLC. It has sat for a few years, and the finals are leaking a little bit, the rams are leaking a little hydraulic fluid. The other thing is that the friction section for the throttle won't hold the throttle in place anymore, to bypass this we have used a pair of trusty vice grips to hold the throttle. My dad and his mechanic friend (who has also passed away) did all the maintenance and fixing for stuff like this on this machine. I've tried to look for his service manuals but have had no luck. In short, I guess what I'm asking for is any advice on how to address the friction section on the throttle and how extensive would it be to go through and fix the small leaks for the finals and the hydraulics? Also open to any other information as far as gotcha's, what to look out for's, tips & tricks, or anything else for the HD-11E's. Any info would be awesome and much appreciated! Thanks!

Sponsored Links