Farm Equipment - wd 45 diesel throttle linkage

Print Page | Close Window

wd 45 diesel throttle linkage

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44401
Printed Date: 10 Sep 2025 at 3:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd 45 diesel throttle linkage

Posted By: bdowning
Subject: wd 45 diesel throttle linkage
Date Posted: 24 Jan 2012 at 5:11pm

I am putting back together a wd diesel and can not find the throttle linkage that goes between the pivot on the side of the block and the injection pump. I believe it is 1/4 inch rod about 4.5 inches long and bent on both ends, but I was wondering if someone could give me a good length on that so I can make one.

Thanks

Replies:

Posted By: j.w.freck
Date Posted: 24 Jan 2012 at 7:38pm

mine measures 4 3/4 center to center on the factory mfg rod.i used 1/4 in rod with ball ends on my other diesels.works real good especially with all the vibration from that buda.get them at napa....

Posted By: bdowning
Date Posted: 24 Jan 2012 at 9:06pm

Thanks