Farm Equipment - Wheel eccentric adjustment tool

Print Page | Close Window

Wheel eccentric adjustment tool

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=35668
Printed Date: 05 Oct 2025 at 12:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wheel eccentric adjustment tool

Posted By: JoeO(CMO)
Subject: Wheel eccentric adjustment tool
Date Posted: 17 Aug 2011 at 5:20pm

Some time back someone posted about an adjustment tool for the square drive eccentric for CA, D10 and D12. I searched and couldn't find a reference to the tool. I think it was availabe from a tool company but don't recall which one.

-------------

Replies:

Posted By: wkpoor
Date Posted: 17 Aug 2011 at 6:35pm

I remember the thread too but not the specifics. I just use a square drive socket and breaker bar.

Posted By: JoeO(CMO)
Date Posted: 17 Aug 2011 at 7:15pm

The CA, D10 and D12 had 1/2 inch square, which is a little tough to find a square drive-driven as compared to other eccentrics had a hex head where a standard socket could be used.

-------------

Posted By: amac
Date Posted: 17 Aug 2011 at 7:56pm

take two 1/2" drive impact sockets and weld them together so you have a square 1/2" on both ends. By using an impact wrench there is less of a chance of twisting them off.

Posted By: BobDinNC
Date Posted: 17 Aug 2011 at 9:52pm

Thanks, AMC. I would never have thought of that.

Posted By: GregLawlerMinn
Date Posted: 17 Aug 2011 at 9:55pm

Or you could use a 1/2" impact extension, a hammer, and a big cresent wrench. I use a good 8 pt 1/2 socket on a 1/2" drive for my CA's.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC