Farm Equipment - 190XT Arms won't lower

Print Page | Close Window

190XT Arms won't lower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209820
Printed Date: 22 Jan 2026 at 12:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190XT Arms won't lower

Posted By: MadCow
Subject: 190XT Arms won't lower
Date Posted: 22 Jan 2026 at 10:03am

I have a 190XT snap coupler. It had a 3pt conversion on it, the full system with torsion bar and everything. With that system on the arms would raise and lower properly. Since I've taken it off it only raises.

I know I have a full adjustment coming for me. But I don't have time, and it's cold as all bologna right now. Is there one quick adjustment I can make so the arms will at least lower by themselves, so I can get my equipment hooked up?

Replies:

Posted By: DrAllis
Date Posted: 22 Jan 2026 at 10:35am

Snap-Coupler lift arms will NOT lower by themselves on that tractor. Why?? Because there's back pressure in the hydraulic system and the colder the oil the more back pressure there is. The back pressure makes it's way to those lift cylinders and they go up. That's the way it is and has been since the tractor was built. Shut the engine off to get the arms down while standing on them.

Posted By: SteveM C/IL
Date Posted: 22 Jan 2026 at 10:50am

That was an easy fix!!