Print Page | Close Window

Belt pulley for WF

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195941
Printed Date: 25 Jul 2025 at 7:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Belt pulley for WF
Posted By: WF owner
Subject: Belt pulley for WF
Date Posted: 30 Jun 2023 at 6:23am
I am (finally) getting ready to reassemble one of my WF's (after getting it back together and realizing the pinion shaft wouldn't turn).

I had planned on removing the (flat) belt pulley, but I have decided I now want to put it back on. Is there supposed to be some sort of gasket between the bell housing and the tractor frame for the belt pulley? (I'm sure it would be the same as on a WC/RC.)

I have the original parts book that my grandfather got when he bought the tractor and I have searched the AGCO parts book. I can't find anything except the O ring on the belt pulley. Am I missing something?



Replies:
Posted By: SteveM C/IL
Date Posted: 30 Jun 2023 at 7:13am
I think there was a cork ring set in the outer edge of hsg that sealed the pulley or block off cup.


Posted By: JoeM(GA)
Date Posted: 30 Jun 2023 at 7:28am
Notice that there are 2 #11's one for the flat block off, then another number below that(70202289), I would think that is for the use of the pulley?




-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net