Print Page | Close Window

7050 powerdirector rebuild question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191797
Printed Date: 20 Aug 2025 at 3:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 7050 powerdirector rebuild question
Posted By: notime
Subject: 7050 powerdirector rebuild question
Date Posted: 15 Nov 2022 at 2:02pm
Hi
My hi range piston and separator plate are scored. Can the piston be resurfaced?
Any comments are appreciated.
Thanks



Replies:
Posted By: MACK
Date Posted: 15 Nov 2022 at 8:34pm
The piston should be ok cause a it lays again a hold plate. The separator plate should be replaced if it is warped.                      MACK


Posted By: notime
Date Posted: 16 Nov 2022 at 9:46pm
Thanks Mack. So the matting surfaces of the piston and separator plate don’t need to be smooth? I guess it is different than a clutch to flywheel arrangement.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net