Print Page | Close Window

Unknown 3/8" set bolt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185975
Printed Date: 04 Jul 2022 at 10:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Unknown 3/8" set bolt
Posted By: Monte Mahan
Subject: Unknown 3/8" set bolt
Date Posted: 23 Jan 2022 at 3:24pm
I'm in the process putting together a C allis I purchased in parts and have a 3/8" set bolt I havn't found a spot for it yet.  I'm pretty sure it goes on the outside of the motor cause it has a little orange paint on it.  



Replies:
Posted By: nella(Pa)
Date Posted: 23 Jan 2022 at 4:59pm
Might go on the front of the governor.


Posted By: steve(ill)
Date Posted: 23 Jan 2022 at 5:04pm


-------------
Like them all, but love the "B"s.


Posted By: juniorp53
Date Posted: 23 Jan 2022 at 5:08pm
goes in pulley on front of crankshaft...  its a tight fit ... but also looks like adjustment screw on steering box cover ..


Posted By: Monte Mahan
Date Posted: 23 Jan 2022 at 6:42pm
Thanks juniorp53.  I owe you a beer.  There was no set screw in the crankshaft pulley and I put an allen setscrew in there.  I had looked at The steering set screw and it was in there.    Thank's again.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net