Construction and other equipment

Print Page | Close Window

H3 shuttle clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140813
Printed Date: 04 Nov 2025 at 7:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 shuttle clutch

Posted By: badtrack
Subject: H3 shuttle clutch
Date Posted: 26 Jul 2017 at 4:18pm

My h3 1963 lost reverse today. Feels like the linkage inside became disconnected. Still moves forward but need to stop with the foot clutch. Is there a way to check out the linkage without splitting the torque housing? Got a look inside the panel where the oil cooler is connected. Looks like the connecting links always stay in forward even when the control lever is pulled back. Do you think I may have broken plates in the clutch hanging it up?? I'm new to this

Replies:

Posted By: Mbluff76
Date Posted: 07 Aug 2017 at 2:49pm

Probably what happened is , the fork on your foward and reverser broke right were the hand lever pulls the clutch packs back and forth. If you have any more questions about it, just email me back at Mwalter7647@gmail.com. hopefully this helps you.

Posted By: badtrack
Date Posted: 21 Aug 2017 at 8:35am

No luck on a easy fix. Found the shuttle clutch collar and shifter worn out. Split the crawler and ordered new parts. After about fifty hours of back yard labor it's back running.