Rockshaft and 3pt on a C
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=105128
Printed Date: 22 Aug 2025 at 10:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rockshaft and 3pt on a C
Posted By: lagreex1
Subject: Rockshaft and 3pt on a C
Date Posted: 22 Apr 2015 at 12:14pm
|
Hi all, I've got a C with a rockshaft. I would like to get a 3pt kit from Tony or OKTractor, but before I do I have one question that I was hoping someone on here can answer: Can I leave my rockshaft on my C and still get the 3pt arms to raise fully without hitting the point on the rockshaft where the hydraulic cylinder mounts to it? I'm hoping that if I tie off the rockshaft fully raised I'll have sufficient clearance. I have a Kub Klipper (Sun Master) finish mower that uses the cultivator arms attached to my rockshaft. If I take the rockshaft off I'll have no way of raising/lowering the mower deck. For the record, I do realize that I'll have to take the PTO pulley wheel off of my PTO to hook up the 3pt cylinder. Rockshaft down:  Rockshaft up:  |
Replies:
Posted By: JimD
Date Posted: 23 Apr 2015 at 9:42am
|
I replied to your email. JImD ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |
Posted By: lagreex1
Date Posted: 23 Apr 2015 at 8:45pm
|
Thanks for the email Jim! For anyone wondering, Jim's answer is "It's close, but I am going to bet that it will have to be removed."
|