![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Off Color Cav Inj Pump |
Post Reply ![]() |
Author | |
BrianC,Ont ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Belleville Ont Points: 903 |
![]() ![]() ![]() ![]() ![]() Posted: 03 Jan 2012 at 5:21pm |
I am working on a 245 MF. The pump is leaking around the throttle shaft and the gasket on the window. Has anyone had any luck taking the top off and replacing the gasket and orings on the throttle and shutoff shafts. The injection shop wont do anything but tear it down and replace all the seals to the tune of $595. He said it is leaking past the other seals a putting to much pressure in the head.
Brian |
|
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
|
![]() |
|
Sponsored Links | |
![]() |
|
Sam T-Ga ![]() Orange Level ![]() Joined: 13 Sep 2009 Location: Monticello, Ga. Points: 392 |
![]() ![]() ![]() ![]() ![]() |
The orings get worn and old then leak, I have changed a bunch of them. You have to remove top to pull trottle shaft out of the top to replace the orings. Look at the trottle linkage and spring after you raise the top up a little to see which holes they are hooked in, and be careful not to drop little pin spring hooks to on gov plate. you need 4 orings and a gasket.
|
|
![]() |
|
injpumpEd ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Walnut IL Points: 5096 |
![]() ![]() ![]() ![]() ![]() |
the only problem with just changing orings is the shaft usually wears grooves in the bore of top cover. otherwise, 4 orings, 2 fiber washers, and a gasket. We have the top covers sent out and steel bushings installed. I usually find all the other seals will be hard and dry, but this can buy you a little time.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
![]() |
|
Jeff Z. NY ![]() Orange Level ![]() Joined: 11 Sep 2009 Points: 7326 |
![]() ![]() ![]() ![]() ![]() |
So what does this have to do with Allis Chalmers Farm Equipment???
![]() |
|
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
|
![]() |
|
injpumpEd ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Walnut IL Points: 5096 |
![]() ![]() ![]() ![]() ![]() |
same engine and fuel injection pump is used on 160/170/175/6040 Allis Chalmers tractors! DUH! LOL!
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
![]() |
|
Jeff Z. NY ![]() Orange Level ![]() Joined: 11 Sep 2009 Points: 7326 |
![]() ![]() ![]() ![]() ![]() |
Well then it's not an off color pump problem. Duh!!! Ditto's
|
|
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
|
![]() |
|
Dipstick In ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Remington, In. Points: 8602 |
![]() ![]() ![]() ![]() ![]() |
No Jeff it was just painted wrong and put on the wrong tractor. Simple as that, huh?
|
|
You don't really have to be smart if you know who is!
|
|
![]() |
|
Jeff Z. NY ![]() Orange Level ![]() Joined: 11 Sep 2009 Points: 7326 |
![]() ![]() ![]() ![]() ![]() |
LOL
I hope no hard feelings I just like busting on folks. Forums are for entertainment. |
|
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
|
![]() |
|
BrianC,Ont ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Belleville Ont Points: 903 |
![]() ![]() ![]() ![]() ![]() |
I posted this here because I know that it was discussed before about someones MF forklift. I done a search and couldnt find it. Also I trust the guys here as apposed to YT.
Brian |
|
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor
|
|
![]() |
|
Ryan Renko ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Edwardsville, I Points: 2335 |
![]() ![]() ![]() ![]() ![]() |
This is a great Allis Chalmers site Brian!! Many good people have allot of great information that can help you about your fuel pump issues. Ryan
|
|
![]() |
|
Jeff Z. NY ![]() Orange Level ![]() Joined: 11 Sep 2009 Points: 7326 |
![]() ![]() ![]() ![]() ![]() |
And Mice Issues ![]() ![]() ![]() |
|
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |