IH 464 V8 engine:

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have one of these that runs very well and isn't an oil burner but the truck has rusted to pieces around it. The hood is usable with some repairs too. Truck is a 1979 S-1924 I believe. I really have no use for the engine myself so going to offer it up here first. I was told it was rebuilt in the mid 1980's but have no supporting paperwork, or anything offering proof. It is still in the chassis and can be run for demonstration should anyone have interest. It will directly replace an IH 404 engine. Truck has a 5 speed transmission installed with PTO and it seems to shift well.
Hydrovac problems put the truck down and after setting several years in a barnyard, it has rusted to pieces. No floorboards left to the cab as example. Gas tank(s) are both rusted through so gas leaks away but it will hold a couple gallons to drive around my property.

I'm going to cut the truck apart under the cab, mount risers and a 5th wheel plate making a small dump trailer from the Scott steel grain bed installed onto the existing chassis. Has a good heavy hoist and works well. 

This project is moving to the front so about a week is all I'll allow the truck to remain together. Gas Ax is ready and waiting to make it usable for me. 

Thanks,

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Codger Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 23 Dec 2020 Location: Utopia Points: 2428	Post Options Post Reply Quote Codger Report Post Thanks(0) Quote Reply Topic: IH 464 V8 engine: Posted: 5 hours 15 minutes ago at 9:45pm
	I have one of these that runs very well and isn't an oil burner but the truck has rusted to pieces around it. The hood is usable with some repairs too. Truck is a 1979 S-1924 I believe. I really have no use for the engine myself so going to offer it up here first. I was told it was rebuilt in the mid 1980's but have no supporting paperwork, or anything offering proof. It is still in the chassis and can be run for demonstration should anyone have interest. It will directly replace an IH 404 engine. Truck has a 5 speed transmission installed with PTO and it seems to shift well. Hydrovac problems put the truck down and after setting several years in a barnyard, it has rusted to pieces. No floorboards left to the cab as example. Gas tank(s) are both rusted through so gas leaks away but it will hold a couple gallons to drive around my property. I'm going to cut the truck apart under the cab, mount risers and a 5th wheel plate making a small dump trailer from the Scott steel grain bed installed onto the existing chassis. Has a good heavy hoist and works well. This project is moving to the front so about a week is all I'll allow the truck to remain together. Gas Ax is ready and waiting to make it usable for me. Thanks,
	That's All Folks!

Sponsored Links