HELP! 303 Knotter Problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I bought a 303 baler a few years back - it was stuck but had not done many bales.  As I got things un-stuck, I forgot about the tucker fingers.  During the first tie, it bent up the arm that holds the cam-follower.  Getting that off is easy, but it always gave me trouble - and about once/year it would get bent again.  Earlier this year I had to weld a new pin for the cam follower.  Well, last week they crashed again, only this time the cam itself broke.  A few questions:

1.  Is it possible to find individual parts for this knotter, such as the CAM and the CAM-follower arm?  Will the AGCO dealer be able to order, or perhaps someone on-line.  

2.  Will parts from other knotters work?   If I bought a old junk NH or JD baler, will those parts likely interchange?

3.  Is it possible to simply swap out the entire knotter from a JD or NH baler.  I hate to do this because mine has so little wear on it otherwise.  However, it will not tie without the tucker fingers in action.

Any help is appreciated.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
barnabas_12 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 23 Jan 2010 Location: New Prague, MN Points: 52	Post Options Post Reply Quote barnabas_12 Report Post Thanks(0) Quote Reply Topic: HELP! 303 Knotter Problem Posted: 27 Aug 2010 at 8:24am
	I bought a 303 baler a few years back - it was stuck but had not done many bales. As I got things un-stuck, I forgot about the tucker fingers. During the first tie, it bent up the arm that holds the cam-follower. Getting that off is easy, but it always gave me trouble - and about once/year it would get bent again. Earlier this year I had to weld a new pin for the cam follower. Well, last week they crashed again, only this time the cam itself broke. A few questions: 1. Is it possible to find individual parts for this knotter, such as the CAM and the CAM-follower arm? Will the AGCO dealer be able to order, or perhaps someone on-line. 2. Will parts from other knotters work? If I bought a old junk NH or JD baler, will those parts likely interchange? 3. Is it possible to simply swap out the entire knotter from a JD or NH baler. I hate to do this because mine has so little wear on it otherwise. However, it will not tie without the tucker fingers in action. Any help is appreciated.

Sponsored Links

Tracy Martin TN Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: Gallatin,TN Points: 10553	Post Options Post Reply Quote Tracy Martin TN Report Post Thanks(0) Quote Reply Posted: 27 Aug 2010 at 11:53am
	I think Dale Schaffer has the parts you need. He goes as Orangereborn,very nice and honest.I think they are same as NH knotters. HTH Tracy Martin

DanNESD Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 22 Oct 2009 Location: Milbank, SD Points: 182	Post Options Post Reply Quote DanNESD Report Post Thanks(0) Quote Reply Posted: 27 Aug 2010 at 9:12pm
	New Holland knotters are the same