FS 301 liners and pistons

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a USED set of pistons and liners from a 190xt diesel.  started hard cold but fine when hot.  i did not do any compression testing, I did  install a NOS M&W kit i got with tractor.  my injectors tested poorly and I had pump rebuilt i believe was most of the problem.   very little ridge, removed without reaming or serious effort.  no cavitation on the sleeves and no signs of abnormal damage.  make offer if you want them.  you pay shipping.  can get pictures but dont have any right now.  parts are stored indoors in a box. in my opinion would make a good loose set for a puller  785-922 six 012 or pm  

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
CAL(KS) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 18 Sep 2009 Location: Chapman, KS Points: 3735	Post Options Post Reply Quote CAL(KS) Report Post Thanks(0) Quote Reply Topic: FS 301 liners and pistons Posted: 07 Apr 2014 at 10:54pm
	I have a USED set of pistons and liners from a 190xt diesel. started hard cold but fine when hot. i did not do any compression testing, I did install a NOS M&W kit i got with tractor. my injectors tested poorly and I had pump rebuilt i believe was most of the problem. very little ridge, removed without reaming or serious effort. no cavitation on the sleeves and no signs of abnormal damage. make offer if you want them. you pay shipping. can get pictures but dont have any right now. parts are stored indoors in a box. in my opinion would make a good loose set for a puller 785-922 six 012 or pm
	Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Sponsored Links