WC right parts wrong configuation drawbar

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Does anyone have a clear photo of the swaying drawbar on a late 40's WC cast iron. 
Due to the damage done to the threads in the housing, during use, the tractor was taken to the local blacksmith for repair (Early 60's).  the platform is welded on now, which is fine.  It looks right, just can't be taken off.  They reconfigured the parts to a fixed drawbar configuration.  From the schematic it look like I have all the parts... however the front mount assembly has been bolted on 90 degrees to what it should be.  
I  might be missing one piece, or picturing this wrong.  The schematic does not show it quite in a way I can be sure. 

Does anyone have a clear picture of the drawbar assembly either on or off the tractor?

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Redwood Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 16 Jan 2012 Location: Ontario Points: 631	Post Options Post Reply Quote Redwood Report Post Thanks(0) Quote Reply Topic: WC right parts wrong configuation drawbar Posted: 13 Feb 2012 at 11:12am
	Does anyone have a clear photo of the swaying drawbar on a late 40's WC cast iron. Due to the damage done to the threads in the housing, during use, the tractor was taken to the local blacksmith for repair (Early 60's). the platform is welded on now, which is fine. It looks right, just can't be taken off. They reconfigured the parts to a fixed drawbar configuration. From the schematic it look like I have all the parts... however the front mount assembly has been bolted on 90 degrees to what it should be. I might be missing one piece, or picturing this wrong. The schematic does not show it quite in a way I can be sure. Does anyone have a clear picture of the drawbar assembly either on or off the tractor?

Sponsored Links