This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
I40 backhoe hyd hose disconnecting |
Post Reply |
Author | |
pineyjd
Silver Level Joined: 12 Sep 2009 Location: Southern NJ Points: 100 |
Post Options
Thanks(0)
Posted: 15 Nov 2010 at 9:33am |
When backhoe is off tractor,do the hyd fed/return hose's need to be connnected to form loop for oil
|
|
Sponsored Links | |
DonBC
Orange Level Access Joined: 12 Sep 2009 Location: Courtenay, BC, Points: 900 |
Post Options
Thanks(0)
|
When I had my H3 I always connected them together as soon as I disconnected them from the hoe to simply keep them clean and free from risk of damage. I can't remember if I did this with the engine running or not.
|
|
Jack of all trades, master of none
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41211 |
Post Options
Thanks(0)
|
I had a diverter valve on my HD4 but also to make a loop when bby-passing the hoe control valve the hoses needed to connect.
I would say YES. but just my idea .
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77840 |
Post Options
Thanks(0)
|
i have a CASE 530 with two hoses that jump from the control valve back to the hoe. when the hoe is off, one of the hoses makes a loop back to the valve. It must be connected after the hoe is off, prior to starting the motor. I was told the pump would stall and possibly blow up if the motor is started as the oil will dead head.
|
|
Like them all, but love the "B"s.
|
|
pineyjd
Silver Level Joined: 12 Sep 2009 Location: Southern NJ Points: 100 |
Post Options
Thanks(0)
|
Doe's the loop hose need to be 4000 lb or can I use a 2000lb |
|
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77840 |
Post Options
Thanks(0)
|
all my hoses were RATED at 2100 psi, and have a bursts pressure of about 4000. I just bought all new hoses for the hoe and had they built at NAPA. Note that athe oil goes thru your control valve, OUT TO THE HOE, back thru the control valve to sump. IF you dont have the hoses connected back to the valve, the oil has no where to go.
|
|
Like them all, but love the "B"s.
|
|
pineyjd
Silver Level Joined: 12 Sep 2009 Location: Southern NJ Points: 100 |
Post Options
Thanks(0)
|
Thanks for the info,went to TSC & bought hose to connect,works fine,now on to the sanding/painting
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |