HD6E Starter Solenoid

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   The starter solenoid on my HD6E has an open coil.  I purchased a Delco type 24 Volt 4 terminal solenoid that was supposed to fit HD6.  DSCF1608.JPG
Many people on eBay do not have any idea of what they are selling.  The replacement solenoid has a short stroke probably from a starter that had a bendix gear.  Inside the solenoid housing there is not enough space for the piston from the original solenoid.  Inside there is a bulkhead plate with a spacer that limits the space available.  Does anyone know how the spacer is attached to the plate?  It looks as if the plate and spacer assembly should be turned around to put the spacer on the other side to increase the space available for the piston.  Unfortunately the plate is staked to the housing.  Help is appreciated.  Please contact George at 6cigol@gmail.com 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Dozer987 Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 08 Aug 2023 Location: West Almond, NY Points: 23	Post Options Post Reply Quote Dozer987 Report Post Thanks(0) Quote Reply Topic: HD6E Starter Solenoid Posted: 5 hours 29 minutes ago at 9:20am
	The starter solenoid on my HD6E has an open coil. I purchased a Delco type 24 Volt 4 terminal solenoid that was supposed to fit HD6. DSCF1608.JPG Many people on eBay do not have any idea of what they are selling. The replacement solenoid has a short stroke probably from a starter that had a bendix gear. Inside the solenoid housing there is not enough space for the piston from the original solenoid. Inside there is a bulkhead plate with a spacer that limits the space available. Does anyone know how the spacer is attached to the plate? It looks as if the plate and spacer assembly should be turned around to put the spacer on the other side to increase the space available for the piston. Unfortunately the plate is staked to the housing. Help is appreciated. Please contact George at 6cigol@gmail.com

Sponsored Links