This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Bushings for WD hand clutch
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
hardwood61 View Drop Down
Bronze Level
Bronze Level


Joined: 16 Aug 2010
Location: MN
Points: 29 		Post Options Post Options   Thanks (0) Thanks(0)   Quote hardwood61 Quote  Post ReplyReply Direct Link To This Post Topic: Bushings for WD hand clutch
    Posted: 30 Aug 2010 at 9:21am
Anybody have any idea of the size bushings that are used - don't have tractor close by and would like to take them along this weekend.  The clutch handle wobbles severely from side to side so I am guessing that the bushings are missing or wore out.  Even if you don't know the original bushing size can any one tell me the size of the pivot shaft - that way I can buy several different sizes with the correct ID and return what doesn't work.
Thanks!
Back to Top
Sponsored Links


Back to Top
Jeff Z. NY View Drop Down
Orange Level
Orange Level


Joined: 11 Sep 2009
Points: 7326 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Jeff Z. NY Quote  Post ReplyReply Direct Link To This Post Posted: 30 Aug 2010 at 9:59am
I think some of the early ones did not use the bushing.
Some of the early 1950's didn't use them I think.
AGCO can get them but they are not cheap.
I think around $30.00 each.
I'm not at the farm today so I can't get you the size. Sorry.
Back to Top
daveingreenbay View Drop Down
Silver Level
Silver Level
Avatar

Joined: 09 Oct 2009
Location: Green Bay
Points: 211 		Post Options Post Options   Thanks (0) Thanks(0)   Quote daveingreenbay Quote  Post ReplyReply Direct Link To This Post Posted: 30 Aug 2010 at 10:01am
Pin diameter is .870.  Hand clutch bore is 1 inch.  Bushings were used on tractors with serial no.`s 34450 and up.  Allis part no. for the pin is 223130.  Bushing part no. is 224705.  Two were used.  On the last two tractors I repaired the hand clutch levers.  I ended up pulling the transmission cover, driving the pin out and replacing it with a new one.  The bore in the hand clutch lever was egg shaped and required boring and a custom bushing was fitted.  Good Luck.  HTH
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.048 seconds.


Help Support the
Unofficial Allis Forum