| Author |
 Topic Search  Topic Options
|
bs5230 
Bronze Level
Joined: 26 May 2010
Location: MI
Points: 19
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: rear motor seal
Posted: 05 Jul 2010 at 1:50pm |
|
hello i have the motor out on my 1951 WD- i pulled the main bearing in the rear and got that half of seal out and replaced-but the top half is in this retainer and i loosened the bolts but they hit the end of the crank where you bolt the flywheel on, do i have to pull the whole crank out to change the top piece of seal,
Edited by bs5230 - 05 Jul 2010 at 2:11pm
|
 |
|
Sponsored Links
|
|
|
Don(MO)
Orange Level
Joined: 12 Sep 2009
Location: Bates City MO.
Points: 6862
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jul 2010 at 4:57pm |
Sounds like someone put too long of bolts in the retainer, You might pull the front timing cover and all three main caps off lift the crank up a little to get the retainer out and then put in the right bolts when you go back together with it. Its a good time to put new front seal in too.
Don
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
norm [ind]
Orange Level
Joined: 16 Sep 2009
Location: BOURBON,IN.
Points: 667
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jul 2010 at 7:40pm |
|
our experiences are the pan gasket is leaking more often than the seals my 2 cents
|
|
Lonn
Orange Level
Joined: 16 Sep 2009
Location: Назарово,Russia
Points: 29773
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jul 2010 at 7:53pm |
|
Might be glued to the block still. Did you tap it lightly to see if it's loose? You'll never get these old style seals to completely seal up. The rear seal is made to leak a very little bit. I agree with norm on the pan gasket.
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|
bs5230
Bronze Level
Joined: 26 May 2010
Location: MI
Points: 19
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2010 at 6:11am |
|
ok i got new front and rear seals, 4 pan gaskets, pto gear box seal, and new clutch, and orange and black heat paint for motor- should be back together today - thank you all
|
|
Butch(OH)
Orange Level
Joined: 11 Sep 2009
Location: Lucerne Ohio
Points: 3831
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jul 2010 at 6:28am |
|
My experiances are about the same as Norm's. Another place they leak is between the rear main cap and block. There are two little gaskets that go in there that are often not in the cheapo gasket kits and just as often left out by unknowing mechanics. I leave them out on purpose and use a bead of silicone there.
Edited by Butch(OH) - 07 Jul 2010 at 6:29am
|
|
