| Author |
 Topic Search  Topic Options
|
wahl4m 
Bronze Level
Joined: 23 Jan 2018
Location: norwalk iowa
Points: 3
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: "g" carb problems ??
Posted: 23 Jan 2018 at 1:41pm |
|
i rebuilt the carb -wouldnt start! installed one of another "g" -run good ! took both apart -& compared parts -ckd the mating surfaces ,floats & levels -cant see anything wrong ?? what am i missing ?any ideas ?? thanks mike
|
 |
|
Sponsored Links
|
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 21547
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jan 2018 at 2:50pm |
|
plugged passage way ?
gasket wrong way ?
it took me 3 'total tear down/clean/rebuilds' to get a CA hydraulic pump to run right...
sorry,had 3 Gs, have none now to eyeball what it could be...
jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
HoughMade
Orange Level
Joined: 22 Sep 2017
Location: Valparaiso, IN
Points: 691
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jan 2018 at 3:24pm |
|
Yeah, every time I've cleaned carb, it took several tries before it was good. Is it possible a gasket is flipped over and blocking a passage?
Edited by HoughMade - 23 Jan 2018 at 3:27pm
|
|
1951 B
|
|
Gerald J.
Orange Level
Joined: 12 Sep 2009
Location: Hamilton Co, IA
Points: 5636
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jan 2018 at 8:58pm |
|
|
|
wahl4m
Bronze Level
Joined: 23 Jan 2018
Location: norwalk iowa
Points: 3
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2018 at 1:15am |
|
ckd all passages /gasket will only fit 1 way w/ float-i chd surfaces for warpage -all ok ! guess ill take it apart again ?? thanks
|
|
drobCA
Orange Level
Joined: 20 Jun 2017
Location: Perris, CA
Points: 292
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2018 at 6:10am |
I had what I guess was a stuck float on a brand new carb. disassembled, found no problems, reassembled = works fine. not the first time a take apart/reassembly doing nothing else has "fixed" whatever.
|
|
3 Ford 8N's I loan to neighbors, but the '52CA, '41B and little B1 I do not.
|
|
Larry in NC
Orange Level
Joined: 09 Feb 2016
Location: NC
Points: 1041
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Jan 2018 at 8:08am |
|
From my experience, the usual problem is a clogged jet, but I cleaned the carburetor on my son's G and it would still would not run. When I pulled the carburetor apart a second time, there was no gas in the bowl. The problem was the float valve sticking. The valve was new, so I tried again and it did not work. Finally found a used valve and installed it and the tractor ran fine. Even new parts are not a guarantee.
|
|
