This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Winch options for a HD5 |
Post Reply |
Author | |
serioussam
Silver Level Joined: 21 Aug 2015 Location: Ontario Points: 52 |
Post Options
Thanks(0)
Posted: 30 Aug 2015 at 7:51am |
Looking at getting a winch for the HD5 and would like to know what my options are
Thanks for any input |
|
Sponsored Links | |
gemdozer
Orange Level Joined: 17 Sep 2009 Points: 942 |
Post Options
Thanks(1)
|
The hd5 and hd6 and td9 used the same winch model
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41211 |
Post Options
Thanks(1)
|
One problem is they are driven by output shaft on transmission - and if you have loader that means counterweights would block access .
One option might be to go to unit with a hydraulic motor . Also as winch is transmission driven - it would mean clutch engagement when winch is used . |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
donoman
Silver Level Joined: 18 Feb 2015 Location: New Zealand Points: 117 |
Post Options
Thanks(1)
|
your best option for a HD5 would be a Carco E24 or EA an Issacson WO6-9 is similar to the EA and was also fitted to TD6 and TD9'S
|
|
serioussam
Silver Level Joined: 21 Aug 2015 Location: Ontario Points: 52 |
Post Options
Thanks(0)
|
I might be getting a winch off a TD9 , also what else am I going to need to make this thing work on the hd5
Thanks again for all the help |
|
Mactractor
Orange Level Access Joined: 20 Jun 2011 Location: New Zealand Points: 652 |
Post Options
Thanks(0)
|
If I recall correctly, Allis has a different drive shaft to IH. There is a slight difference in the mounting stud pattern between the two makes of tractor. Ive used Carco from IH tractors on HD6
|
|
donoman
Silver Level Joined: 18 Feb 2015 Location: New Zealand Points: 117 |
Post Options
Thanks(0)
|
I fitted a WO 6-9 Issacson to the Buda HD6E I purchased in 1974 ,it bolted straight up, I think there is a difference in driveshaft length, although the splines are the same, I recently acquired a E 3O Carco winch believed to be off a TD9 I had to lengthen the shaft to make it the correct length.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |