| Author |
 Topic Search  Topic Options
|
55allis 
Orange Level
Joined: 30 Jun 2020
Location: Griswold Iowa
Points: 1314
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 8550 questions
Posted: 11 hours 47 minutes ago at 9:43pm |
|
Good day,
So looking at a 8550 that’s about an hour away that has been sitting for about 6-7 years due to blowing an injection line.
Seller says his son finished 10-15 acres of NH3 before replacing the line but says it still didn’t run right so he parked it in the weeds planning on repairing it but never got to it.
Seller’s pretty sure it has a hole in the piston?
If that’s the case would it be reasonable to only replace that piston and ring set?
|
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors 
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22733
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 hours 1 minutes ago at 10:29pm |
|
Interesting how we go from a leaking injection line (which would leak fuel and could cause a miss-fire) to a hole in a piston ?? Two unrelated problems. It could have been a leaking number one injector line and a failed piston could be number 2 or 3 or 4 or 5 or 6 piston ?? Should have been a ton of blow-by with a failed piston. There are injector lines under the valve covers too.........
|
|
Mike Kroupa
Silver Level
Joined: 02 Oct 2009
Location: pierce, ne
Points: 339
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 34 minutes ago at 10:56pm |
|
I owned and farmed with a 8550 for many years and yes they are notorious for injection line failures. One other possibility is when they replaced the failed line the inj. pump barrel might have moved slightly, causing fuel to bypass and the engine still miss. This happened to me once, removed the one head expecting to find something and everything looked good. Good Luck!
|
|
55allis
Orange Level
Joined: 30 Jun 2020
Location: Griswold Iowa
Points: 1314
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 29 minutes ago at 11:01pm |
|
I thought that very interesting too..
Going to look at it possibly Saturday morning if all works out.
Seller drained the engine oil last spring or so to start in on the repair so I wont be able spin it over.
Is there any concerns about being a dry start?
|
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22733
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 27 minutes ago at 11:03pm |
|
Fill the new engine oil filters with oil before installing and start it at an idle to let the oil pressure build.
|
|
55allis
Orange Level
Joined: 30 Jun 2020
Location: Griswold Iowa
Points: 1314
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 17 minutes ago at 11:13pm |
|
Is there a way to have a custom lines made that has thicker sides walls or bigger line with same fittings?
Never even seen one in person, only photos and videos off the internet so bear with me.
With this being told what’s a good price range to offer?
Paint is crappy (mostly brown) tires aren’t the greatest but do look like they hold air and might last awhile. Cab interior is crap, seat has a hole. Hour meter reads 3644 hours but not sure if it works.
|
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors
|
|
55allis
Orange Level
Joined: 30 Jun 2020
Location: Griswold Iowa
Points: 1314
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 hours 13 minutes ago at 11:17pm |
 DrAllis wrote:
Fill the new engine oil filters with oil before installing and start it at an idle to let the oil pressure build. |
Ok, didn’t know what it would do to a sitting engine. Thanks!!!
|
1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors
|
|
