D17 serries 1 and D15 serries 1 question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a D17 serries 1 with power steering.  I broke the front casting where the pin that holds the front end on fits.  Not to suprised it was worn badly and I put my loader from the D15 on the D17 last summer when the D15 had a blown motor. 
My question is the D15 serries 1 has a good front counter weight i know it is tight I had it sleeved a decade ago when I rebuilt the tractor.  I know I can not swap the entire counter weight but can I split the weight and swap just the bottom part with the broken casting?  I know the D17 weight is taller the bolt spacing on the frame rails makes that clear.  I am just hoping maybe the bottom section of the casting is the same part? Both tractors are pretty much stuck in the snow at the moment not real easy to work pn but I am trying to come up with a plan or figure out if I need to be looking for a parts tractor. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Dan73 Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 04 Jun 2015 Location: United States Points: 6056	Post Options Post Reply Quote Dan73 Report Post Thanks(0) Quote Reply Topic: D17 serries 1 and D15 serries 1 question Posted: 1 hour 37 minutes ago at 12:41pm
	I have a D17 serries 1 with power steering. I broke the front casting where the pin that holds the front end on fits. Not to suprised it was worn badly and I put my loader from the D15 on the D17 last summer when the D15 had a blown motor. My question is the D15 serries 1 has a good front counter weight i know it is tight I had it sleeved a decade ago when I rebuilt the tractor. I know I can not swap the entire counter weight but can I split the weight and swap just the bottom part with the broken casting? I know the D17 weight is taller the bolt spacing on the frame rails makes that clear. I am just hoping maybe the bottom section of the casting is the same part? Both tractors are pretty much stuck in the snow at the moment not real easy to work pn but I am trying to come up with a plan or figure out if I need to be looking for a parts tractor.

Sponsored Links