| Author |
 Topic Search  Topic Options
|
randy 
Orange Level
Joined: 12 Sep 2009
Location: Illinois
Points: 1226
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Rear inner weight question
Posted: 17 Dec 2020 at 6:24pm |
How much could inner weights for 38 inch castings weigh?  
|
|
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
 |
|
Sponsored Links
|
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8391
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 6:30pm |
|
Ive heard 1400 lbs,,, those are monsters, sorry thought they were the big dudes,, pictures were hard to tell,
Edited by DougG - 17 Dec 2020 at 7:35pm
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8745
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 6:47pm |
|
mine are only 2in? thick...seen a lot thicker ones....don't know how many variations there are
|
|
randy
Orange Level
Joined: 12 Sep 2009
Location: Illinois
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 7:12pm |
|
I think these are 2 maybe 3 inches thick, and 31 inches wide
|
|
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
|
randy
Orange Level
Joined: 12 Sep 2009
Location: Illinois
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 7:13pm |
|
My 7060 and 8050 have 2 on the inside
|
|
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24901
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 7:20pm |
cast weighs about .284#/cu in or 491#/cu ft so... figure out the volume of the weight.. measure then subtract 'hole' from total.. all I know is my back hurts just LOOKING at them !
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22316
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 7:26pm |
|
400 lbs each.
|
|
randy
Orange Level
Joined: 12 Sep 2009
Location: Illinois
Points: 1226
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 7:30pm |
|
|
|
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3604
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 9:24pm |
|
What was the usual installation for these inner rear wheel weights? Factory installed? Dealership installed? Field (on farm) installed?
If weights were not factory installed onto tractor, how did truckers usually secure them to their trailer for transport from factory to dealership ? Metal crate? Wooden crate? Etc...??
|
|
LionelinKY
Orange Level
Joined: 12 Sep 2009
Location: Radcliff,KY
Points: 698
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2020 at 10:54pm |
|
You say 31" wide which I assume to mean diameter?? Would these same weights have been used on a 34" wheel too?? Our 1966 190XT has 1 inside each rear wheel with the 6 pie weights on the outside of each wheel too. We are the 2nd owners and bought it as is in 1970. Local dealer sold it brand new and Dad knew the original owner. Tractor was ordered that way due to the very hilly fields that were on the guy's farm. He wanted it heavy to pull/hold on his hills.
|
|
"My name is Lionel and I'm an Allisoholic"
|
|
jiminnd
Orange Level
Joined: 16 Sep 2009
Location: Rutland ND
Points: 2319
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Dec 2020 at 9:00am |
|
I think that is the same weight I had on my D21, had three on each side, when I traded for 7030 the dealer took them off and put 2 on each side of that. Dr knows but my dealer called them 450 lbs.
|
|
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
|
