| Author |
 Topic Search  Topic Options
|
Mrgoodwrench 
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190xt timing marks
Posted: 08 Feb 2017 at 9:56am |
|
We're doing an overhaul on a 190xt ser1 . Got the engine torn down but noticed only one stamper mark on crank gear it lines up with cam with key at 12oclock but shouldn't there be one for the idler gear so we can get the pump in correctly?
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
 |
|
Sponsored Links
|
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5124
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 10:41am |
|
not really. Pump is timed to the crank, and internal pump mark, so whatever happens between is not really important.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 11:38am |
|
I see there is two sets of marks on the idler and a mark on the internal inj pump gear guess I'm. It sure why there is no mark to line up idler to crank so you can then line up pump gear to idler. Picture in the book I have shows 2 marks on crank. How do you get the pump timed to crank with no mark?
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
injpumpEd
Orange Level Access
Joined: 13 Sep 2009
Location: Walnut IL
Points: 5124
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 12:24pm |
|
Damper pulley or flywheel marks is where an injection pump would be timed to. On some engines the inj pump gear has to be put in "in time" because the gear can't come out of the cover. On AC engines, the gear can come out, so it can be positioned where ever it's needed.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2095
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Feb 2017 at 12:26pm |
|
Thanks Head I forgot about that second hole in the cover. I've done several of these engines in frame this is my first total overhaul
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
