HD6G Final Parts

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello all, Ive been tearing into the finals on my 6G due to a bearing failure on the intermediate shaft and have finally gotten to the blood and guts of it.  When the bearing failed it broke the intermediate shaft and chipped the edges of some of the pinion gear teeth that is on the intermediate shaft.  If I have to I can probably clean the chipped teeth up and re-use the gear as 90% of the teeth surfaces are still intact and look to be not cracked or broken at the bottom.  If I can find a replacement for a decent price I'll go ahead and replace it.  The shaft on the other hand is a no go and will have to be replaced.  My question is, who do you all recommend for replacement parts.  I've looked around the net but haven't been able to come up with much.  I was hoping to find a scrap yard that offered parts for the Allis heavy equipment but have been unsuccessful.  The old thing runs good and everything else works so I hate to quit on it.  Thanks for anything info you have to offer and happy digging.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Hogman Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 26 Apr 2015 Location: United States Points: 7	Post Options Post Reply Quote Hogman Report Post Thanks(0) Quote Reply Topic: HD6G Final Parts Posted: 09 Mar 2016 at 8:13pm
	Hello all, Ive been tearing into the finals on my 6G due to a bearing failure on the intermediate shaft and have finally gotten to the blood and guts of it. When the bearing failed it broke the intermediate shaft and chipped the edges of some of the pinion gear teeth that is on the intermediate shaft. If I have to I can probably clean the chipped teeth up and re-use the gear as 90% of the teeth surfaces are still intact and look to be not cracked or broken at the bottom. If I can find a replacement for a decent price I'll go ahead and replace it. The shaft on the other hand is a no go and will have to be replaced. My question is, who do you all recommend for replacement parts. I've looked around the net but haven't been able to come up with much. I was hoping to find a scrap yard that offered parts for the Allis heavy equipment but have been unsuccessful. The old thing runs good and everything else works so I hate to quit on it. Thanks for anything info you have to offer and happy digging.

Sponsored Links

wayneIA Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 17 Oct 2009 Location: Waverly, IA Points: 268	Post Options Post Reply Quote wayneIA Report Post Thanks(0) Quote Reply Posted: 09 Mar 2016 at 8:37pm
	I've gotten parts for my HD5 from Thill Track and Tractor in Wisconsin, and Draper Tractor Parts in Washington state.

gemdozer Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 17 Sep 2009 Points: 1072	Post Options Post Reply Quote gemdozer Report Post Thanks(0) Quote Reply Posted: 10 Mar 2016 at 5:37am
	I have the HD6 final drive parts ,pinion,intermediaire shaft, top shaft,gears etc.

Hogman Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 26 Apr 2015 Location: United States Points: 7	Post Options Post Reply Quote Hogman Report Post Thanks(0) Quote Reply Posted: 10 Mar 2016 at 8:37pm
	Thanks for the replies. Gemdozer, I'm not really sure how to send a private message on here but I am interested in the shaft and the gear at the least. What would be the best way for me to get in touch with you on a price? If it helps you can send me an e-mail at thewaidfamily@outlook.com I look forward to hearing back from you and thanks again to everyone.