| Author |
 Topic Search  Topic Options
|
rasman57 
Silver Level
Joined: 12 Sep 2009
Location: Illinois
Points: 411
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Recommend Good Tires for Loader
Posted: 25 Jan 2011 at 10:18am |
|
I need to replace front tires on a big bucket loader tractor. At least E rated or in the old days, 10-12 ply rated for sure. Original size was 7.50 x 16 and I just discovered that 11 inch wide pickup tires are too wide and rub against the spindle steer arms..of course. Any experience with brands or mfg recommendations good or bad. Seems hard to find a 16 inch less than 11 inches wide with a real load rating in my on line search so far.
|
 |
|
Sponsored Links
|
|
|
john(MI)
Orange Level
Joined: 12 Sep 2009
Location: SE MI
Points: 9262
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 10:32am |
|
Trailer tires?
|
|
D14, D17, 5020, 612H, CASE 446
|
|
Dans 7080
Orange Level
Joined: 05 Feb 2010
Points: 1146
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 10:52am |
|
A 235-85-R16, has a width of 9.25" and a height of 31.75".
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 42028
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 10:54am |
I used wagon float type tires on IH 460 Utility with Henry loader
On the 715B I have a Goodyear tire made for Industrial laoders , might try to look in dealer catalog and see whatthey have for TLB use.
|
|
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
|
Matt MN
Orange Level
Joined: 14 Sep 2009
Location: Silver lake MN
Points: 1491
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 10:56am |
|
A 215-85-16 tire would work out also unless you are in soft ground. We have some 10ply 7.50-16 3 rib on the front of our loader tractor, but they were expensive..
|
|
Unless your are the lead horse the scenery never changes!!
|
|
JC-WI
Orange Level Access
Joined: 11 Sep 2009
Location: wisconsin
Points: 34374
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 11:36am |
|
Matt where did you get them? 8 ply were from 80-130, couldn't find any 10 ply. My tires break out in the side wall before the tread facing is worn down very much..and I keep them up over 45-50+# pressure. Use to run at 35-40 but didn't hold up at that pressure either.
|
|
Matt MN
Orange Level
Joined: 14 Sep 2009
Location: Silver lake MN
Points: 1491
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 11:46am |
|
they were from the local Cenex store, I believe they were almost $200 each with the tube.
|
|
Unless your are the lead horse the scenery never changes!!
|
|
Rawleigh
Orange Level
Joined: 14 Sep 2009
Location: White Stone, VA
Points: 421
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2011 at 4:12pm |
Used 18 ply aircraft tire $48.00 plus shipping. New $108.00. new on rim $154.00 http://www.noflats.com/tractorfronts.htm
|
|
