| Author |
 Topic Search  Topic Options
|
Daehler 
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1164
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: tac and hour meter ?
Posted: 14 Jun 2015 at 10:50pm |
|
Working on tracing problem on why my tac and hour meter isn't working on a 8000 series. They have kicked on separately from each other in the pass but dont know much for a starting point.
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
 |
|
Sponsored Links
|
|
|
Leon B MO
Orange Level
Joined: 12 Sep 2009
Location: Old Monroe, Mo
Points: 2197
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2015 at 5:54am |
Check the flywheel sensor, on ours the sensor backed out of the mounting base. It works now. Leon B
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24774
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2015 at 6:03am |
|
bad grounds ? could be vibration over the years has broken the wires( won't look bad).
just things I've seen before....sigh
Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Daehler
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1164
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jun 2015 at 9:44pm |
|
Were would the all the grounds be checked? Checked the sender on flywheel and a wire was broken did a do it your self fix and nothing from it. It looks like it rubbed at one point.
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
|
Daehler
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1164
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Mar 2016 at 3:19pm |
|
Bump. Still haven't found problem. There is power that comes up to the meter but nothing is coming off the other two brown wires that go to the sensors. Have no juice at the flywheel sensor. Is it in the meter itself?
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2425
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Mar 2016 at 7:26pm |
|
There's no voltage (juice) going to the sensor. The sensor creates a magnetic impulse signal to the meter as the flywheel passes by it. The sensor has a specific ohms reading if checked with an ohm meter. I don't presently know that amount. You could check the ohms reading against a new or good used one if available.
|
|
Daehler
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1164
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 May 2016 at 11:40am |
|
Still working on getting this tach going. Bought a new sensor and still nothing. Going to check with ohms meter at sensor but could the tach and hour meter just be bad? Or is the flywheel supposed to be in a certain spot.
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
|
Dustyn mccloud
Bronze Level
Joined: 07 Nov 2016
Location: Ohio
Points: 2
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Nov 2016 at 6:28pm |
|
D17 allis chalmers series 3 with loader mid conditio gas what u guys think on price wants 4000
|
|
